Print Page - 3rd, gen door jamb switch

Title: 3rd, gen door jamb switch
Post by: AZMoparboy on November 29, 2009, 08:22:37 PM

Hi again,

Still working on small things to finish up the charger and have come on another parts problem. I went to the parts store this weekend and got thedrivers side jamb switch, got home, started to install it and was the wrong one. It seams that my Charger has 1/2" holes for the switches. Is this something anyone else has come across. None of the switches that the parts store have will fit :'(. I hope someone will help with a part numbers and or a place to get one :yesnod: I need the drivers side only and has two prongs.

Steve

Title: Re: 3rd, gen door jamb switch
Post by: Nacho-RT74 on November 29, 2009, 08:46:25 PM

mmm... I remove mines with 9/16" wrench

Title: Re: 3rd, gen door jamb switch
Post by: Nacho-RT74 on November 29, 2009, 08:54:08 PM

PN 2947844

Title: Re: 3rd, gen door jamb switch
Post by: AZMoparboy on November 30, 2009, 08:56:14 AM

Hi Nacho,

Thanks so very much. I see that there is a good used switch on ebay and I'm going to bid on it. If I don't get it then will just keep trying now that I have a good part number.

Your the best, Dude,
Steve

Title: Re: 3rd, gen door jamb switch
Post by: Nacho-RT74 on December 05, 2009, 11:52:25 AM

http://cgi.ebay.com/ebaymotors/Light-Switch-70-71-72-73-Superbee-GTX-Duster-New-Yorker_W0QQitemZ160382816063QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item25578f8f3f

DodgeCharger.com Forum

Mopar Garage => Electric, Gauges, & Lights => Topic started by: AZMoparboy on November 29, 2009, 08:22:37 PM