Print Page - floor thickness?

Title: floor thickness?
Post by: cudadude013 on April 18, 2008, 09:55:41 AM

anyone know the floor gauge?

and while I'm asking I was also curious if anyone could tell me what length the windshield wiper blades are?

Thanks

Title: Re: floor thickness?
Post by: moparmusclecars on April 19, 2008, 12:38:19 AM

I'm thinking it's 16 gauge, as the outside sheetmetal is usually 20 gauge. Don't you have a small piece you can actually gauge to see?

Title: Re: floor thickness?
Post by: TexasStroker on April 19, 2008, 02:22:00 AM

I was going to say 16 ga too...

Title: Re: floor thickness?
Post by: Mike DC on April 19, 2008, 04:44:53 AM

I don't think they're really any thicker than the outer skin.

Maybe there's one notch of difference if that. Maybe 18-20-guage bodywork and 16-18-guage flooring.

I think 18-guage is technically .048" thick according to the micrometers.

Title: Re: floor thickness?
Post by: Hemidog on April 19, 2008, 03:29:06 PM

wiper blades, 15"

Title: Re: floor thickness?
Post by: cudadude013 on April 20, 2008, 03:56:41 PM

Thank you :cheers:

DodgeCharger.com Forum

Mopar Garage => Paint, Body & Trim => Topic started by: cudadude013 on April 18, 2008, 09:55:41 AM