DodgeCharger.com Forum

Mopar Garage => Chassis, Suspension, Brakes, Wheels, & Tires => Topic started by: Nacho-RT74 on March 28, 2007, 01:25:24 PM

Title: Chevrolet Monza brakes
Post by: Nacho-RT74 on March 28, 2007, 01:25:24 PM
Some of you guys now where to find 1975 Chevrolet Monza brakes parts ? A friend of mine got a VERY RARE DOWN HERE 1975 Monza, never assemblied, and apparently no interchange parts with Camaro or Trans Ams even they are very similar.

he needs rotors, bearings and pads
Title: Re: Chevrolet Monza brakes
Post by: moparguy01 on March 28, 2007, 02:30:33 PM
itll make a difference what engine he has. if he has a 4.3 v6,
heres the rotor for about $85 a peice US
http://www.partsamerica.com/ProductDetail.aspx?MfrCode=RAY&MfrPartNumber=5008&PartType=221&PTSet=A

Heres pads at $35.06 a set
http://www.partsamerica.com/ProductDetail.aspx?MfrCode=RAY&MfrPartNumber=PGD38M&PartType=219&PTSet=A

and bearings

Outer: 6.29
http://www.partsamerica.com/ProductDetail.aspx?MfrCode=SKF&MfrPartNumber=BR1&PartType=184&PTSet=A

Inner: 7.29
http://www.partsamerica.com/ProductDetail.aspx?MfrCode=SKF&MfrPartNumber=BR6&PartType=184&PTSet=A

and of course bearing seals 2.19
http://www.partsamerica.com/ProductDetail.aspx?MfrCode=SKF&MfrPartNumber=17187&PartType=292&PTSet=A

Parts are still readily available up here for those. Thats just the standard Checker auto parts website. I'm sure any NAPA or Oreilley's auto parts up here in the states can get them as well.

Hope that helps. Remember the above listings are for a 75 Monza with the 4.3, if its got a different engine you have to take that into account and find the right part number, since they might change between the 4 cylinder, 6 cylinder, and the v8.


Title: Re: Chevrolet Monza brakes
Post by: Nacho-RT74 on March 28, 2007, 02:55:24 PM
is 350 engine I think
Title: Re: Chevrolet Monza brakes
Post by: moparguy01 on March 28, 2007, 03:37:24 PM
looks like they are all the same parts. so they are available and not terribly expensive either.
Title: Re: Chevrolet Monza brakes
Post by: Nacho-RT74 on March 30, 2007, 05:45:22 PM
Ok, it looks I have to send an email, or just post ANY Zip code to get the info