Print Page - K FRAME TORQUE SPECS

Title: K FRAME TORQUE SPECS
Post by: oldsnofear on January 24, 2007, 05:10:54 PM

DOES ANYONE KNOW THE TORQUE SPECS FOR THE 4 FRAME BOLTS I CANT FIND IT IN THE SERVICE MANUAL I COULD JUST RAM IT WITH THE GUN BUT ID RATHER DO IT RIGHT THANKS

Title: Re: K FRAME TORQUE SPECS
Post by: daytonalo on January 25, 2007, 05:32:14 PM

an 1/2 drive air gun still wont bring them to spec , they are large bolts

Title: Re: K FRAME TORQUE SPECS
Post by: John_Kunkel on January 25, 2007, 05:50:21 PM

If it's a non-cushioned K-member the correct torque is 150 ft. lbs.

Title: Re: K FRAME TORQUE SPECS
Post by: oldsnofear on January 30, 2007, 04:33:59 PM

THANKS

DodgeCharger.com Forum

Mopar Garage => Chassis, Suspension, Brakes, Wheels, & Tires => Topic started by: oldsnofear on January 24, 2007, 05:10:54 PM