Print Page - Three point seatbelt question.

Title: Three point seatbelt question.
Post by: eda4031 on January 30, 2015, 01:19:34 PM

I want to install three point belts in my 70. I have found them at XV Racing Products. The pictures show them installed on a 70. Mine has two tabs above the driver/passenger door but I'm not sure if there is a mounting hole for attachment to the roof. Don't want to cut the headliner to explore. If it has the tabs, it should have an attachment hole up there as well, right?

Thanks for any help.

Title: Re: Three point seatbelt question.
Post by: Mike DC on January 31, 2015, 03:53:04 PM

The shoulder belt holes should be standard on any roof.

Title: Re: Three point seatbelt question.
Post by: GordonGriggs on July 10, 2015, 08:46:28 PM

Can someone post a photo of where the shoulder belt harness bolts to the roof? The person that owned my 69 charger before me just put the lap belts in and did not put
in the shoulder belts. I have no idea where the bolt goes in the roof.

Thanks!

Title: Re: Three point seatbelt question.
Post by: comet_666 on July 14, 2015, 07:06:34 PM

I will post them tomorrow for you.
I'm going to be installing XV 3 point retractable front and the rear lap belts sometime this week.

Title: Re: Three point seatbelt question.
Post by: comet_666 on July 14, 2015, 07:09:48 PM

Also, look at these pictures.

http://xvengineering.com/products/xv-racing-products-3-point-retractable-belt-bucket-seats-black

Gives you an idea near the coat hook where it is located

Title: Re: Three point seatbelt question.
Post by: oldcarnut on July 15, 2015, 03:57:04 PM

From my 70 RR. Screwdriver pointing to threaded hole

Title: Re: Three point seatbelt question.
Post by: 303 Mopar on July 15, 2015, 04:20:41 PM

:popcrn: :popcrn: :popcrn:

DodgeCharger.com Forum

Mopar Garage => Interior => Topic started by: eda4031 on January 30, 2015, 01:19:34 PM