Hey guys, I would really just like a simple answer. 71 Charger with 727 long tail. How many quarts for a filter change?
What type fluid? Don't wan't to now anything else. No "use type-F" Dexron #3 which is not available anymore where I am.
Is Dexron 6 the way to go no? It says it's fully backwards compatible with Dexron 3.
Thanks
stock pan etc, john Kunkel will correct me if I'm wrong,
but i think it s 7 Qrts, always best to check level at operating temp on a flat surface and top up as needed
Thanks for the reply. What I really want to know is what type fluid. Dexron 3 is not available. Is dexron 6 ok?
Thanks
Not sure on that one , backwards compatible ? John kunkel would know this , hope he chimes in with his knowledge
Any Dexron/Mercon will work, I prefer type F.
For just a filter change with a stock pan, 4-5 quarts is all that's needed.
I knew about Dex/Merc, each number is an upgrade, but I did not know Type Ford was an option for us.
Can I ask why you use Type F? I have a filter/fluid change coming up at the end of the month.
Type F will give slightly firmer shifts.
Sold. :cheers:
I have also heard of people using a 50/50 mix of Dexron and Type F.
Jason
Do different tranny fluids solute or just suspend?
I always ran type f with good results.