Basically, when I start the car, the needle on the tic toc tac pegs all the way to the right and doesn't move. did I hook up something wrong?
Yes.....make sure the tach signal wire is hooked up to the negative (-) side of the coil
Quote from: Just 6T9_CHGR.... on March 11, 2006, 06:36:13 PM
Yes.....make sure the tach signal wire is hooked up to the negative (-) side of the coil
O.k. I think I did, maybe it's a bad connection.
if power & signal wires are reversed this could be the problem