News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Flocked Window Channel Piece

Started by 69fourspd, January 27, 2013, 01:33:19 AM

Previous topic - Next topic

69fourspd

Does anybody know what this is called or where to get it? I cant seem to locate them.  They are the flocked rubber pieces that go inside the door, in the channel that the trim part on the back of the door window goes into. I found this picture COKE posted on another thread a few years back, but it didn't mention what they are called. Any ideas?

Thanks for the pic COKE....

cdr

inner window felts ,they also have outer
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

b5blue

Call them: http://www.restorationspecialties.com/   Then let me know how much I need them also!   :2thumbs:

69fourspd

Thanks guys.  I will give them a call.  Once I find them I will let you know where and how much $

:2thumbs:

bill440rt

"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce

69fourspd

I found this on yearone's site, but it says convertable.  It also doesn't give much of a description.  Anybody have an idea if they will not work?? I am willing to give it a shot for $30.....

https://www.yearone.com/Product/1966-74-a-b-e-body/gc68v