Nice 70 charger but I would change the hood scoop

[gers1968rt]

This is a nice 70 charger on ebay, but I would change the hood scoop. I think a 6 pack scoop would look better than that ford/ mercury scoop.

http://cgi.ebay.com/ebaymotors/1970-DODGE-CHARGER-RT-PRO-TOURING-HEMI-SEMA-SHOW-CAR-800HP-MINT-/271145841344?pt=US_Cars_Trucks&hash=item3f218d32c0#v4-37

[tan top]

i'm  not a great fan of hood scoops on a second generation  ,  although like the lift off hood six pack A12 , sixty nine & a half  style   ,

but been looking at this charger for a while on Ebay  , think i could live with it  , more than with any other hood scoop ,  as its sort of a optical illusion , sort of thing ,  looking from out side the car at some angles

although  taking the time to fit a air grabber set up , might be my first choice if i had to have a scoop / cold air intake   , but then your limmited  what high rise intake manifold you can run  , something you was prolly puting a scoop on for in the first place  

[Cooter]

I'd rather see a GM style cowl hood than that thing.

[tan top]

I'd rather see a GM style cowl hood than that thing.

i forgot about that Cowl GM type      , think you could be right , more i'm thinking about it  

[Mytur Binsdirti]

Looks like a zit that was just popped.

[rt green]

nice car. hate the wheels

[1974dodgecharger]

nice car. hate the wheels

Thats why its on ebay FOREVER!!!

[Dino]

I've never seen a scoop that made the hood look better than stock.  The 2nd gen looks best untouched save for the wheels...not these though...

[johnnyseville]

Don't like the hood, nor the placement of the HEMI emblem, but wheels are nice.  Buy a real Hemi Charger for less.

[Ghoste]

Not a fan of scoops on 2nd gens either and especially other brands versions like the Ford T-bolt scoop on this one or that cowl induction Chevelle thing.  Outside of that I kind of like that car, were I to be in the market for it I could overlook the scoop knowing I would ditch it after purchase.  The wheels being replaced are a given of course.

[Bobs69]

My first thought is that they both look STUPID. 

[Homerr]

As it sits it looks unsellable.  Put on a stock hood, Magnum 500's, and you've got yourself a $70,000 Hemi clone.

[bill440rt]

Pretty sure that car was in a detailed build thread over on the www.1970chargerregistry.com forum.
IIRC a stock steel '70 hood was cut up for the bubble. 
Wasn't it also featured in a booth at SEMA? 

[hatersaurusrex]

Who got that car pregnant?

[gers1968rt]

Not a fan of scoops on 2nd gens either and especially other brands versions like the Ford T-bolt scoop on this one or that cowl induction Chevelle thing.  Outside of that I kind of like that car, were I to be in the market for it I could overlook the scoop knowing I would ditch it after purchase.

My sentiments, too.

[charger_fan_4ever]

I vote for ugliest hood scoop ever and wheels are not far off. They belong on a honda civic.

[tan top]

nice car. hate the wheels

yeah , wheels don't suit the car ,     looks silly IMO  

[1974dodgecharger]

As it sits it looks unsellable.  Put on a stock hood, Magnum 500's, and you've got yourself a $70,000 Hemi clone.

The seller wont do that though 

[twodko]

To each his/her own but.....

The hood scoop and wheels lool like hell. Just butt ugly. The emblem looks like an auto parts store "stick on"

[JB400]

  Another member has those Foose wheels on his car.  Emblems are factory.  I'd pull the Hemi out and put in an A/FX clone and drop in a 440 in the charger and put the hood back to stock with the same paint scheme.

[odcics2]

 

[Magnumcharger]

.

[ACUDANUT]

Buy it now 120K 

[1974dodgecharger]

Buy it now 120K 

120k pennies

[Dino]

Is this a new trend now to fill the valance corner gaps? 

[Cooter]

That's why this car is done that way Dino. it's being offered to folks that want a "Resto-mod, NOT a factory Hemi Charger. I think the valances look BETTER filled than not, but then again, the factory seam sealed 'em so I guess one COULD say they were "Filled" from the factory as well.

[Dino]

That's why this car is done that way Dino. it's being offered to folks that want a "Resto-mod, NOT a factory Hemi Charger. I think the valances look BETTER filled than not, but then again, the factory seam sealed 'em so I guess one COULD say they were "Filled" from the factory as well.

Ah yes, missed the restomod bit.  Looks like the quarter extensions have been made permanent as well.  I do like the clean look of it as well but most of th etime it looks bondo'ed over.  Nothing wrong with having a nice even gap that gets filled with sealer just before paint though. 

[6pkrtse]

Hideous, The Charger hood is best left alone. Although I do like the sixpack scoops on 68-70's.

[richRTSE]

Don't like the hood, nor the placement of the HEMI emblem, but wheels are nice.  

Isn't the Hemi emblem in the correct spot?   

I could live with those wheels, but that hood has got to go.... 

[6pkrtse]

Yes, On a 70' that is where the Hemi emblem was located. I never liked it there personally either. Between the door indentions like on a 68' or 69' looks much better.

[Ghoste]

I never minded it there.  It seemed somehow fitting with some of the other styling changes for the year. 

[Bobs69]

Hideous, The Charger hood is best left alone. Although I do like the sixpack scoops on 68-70's.

What does the 6 pack scoop look like?

[Ghoste]

He's referring to a retrofit of the stock Super Bee/Road Runner Six Pack scoop onto a Charger.  Its the big one you've seen on the 69 1/2 Bees and Runners, the Chargers didn't have one as stock.  (if that is what you are asking for)

[moparstuart]

He's referring to a retrofit of the stock Super Bee/Road Runner Six Pack scoop onto a Charger.  Its the big one you've seen on the 69 1/2 Bees and Runners, the Chargers didn't have one as stock.  (if that is what you are asking for)

yeah some clown  butchered my original superbird hood with one   

[kab69440]

Dig up a Coronet hood and fix it. The important stuff hasn't been cut up, has it?

[moparstuart]

Dig up a Coronet hood and fix it. The important stuff hasn't been cut up, has it?

I did fix it   I put a proper 70 plymouth scoop on it

[Ghoste]

And it does look a lot better on there.