News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Seam sealer question

Started by Daytona R/T SE, February 09, 2013, 06:34:10 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Daytona R/T SE

February 09, 2013, 06:34:10 PM
Is there supposed to be seam sealer applied to the area where the quarter panel wraps around into the door jamb on a '69 Charger?

cdr

#1
February 09, 2013, 07:31:38 PM
yes it looks brushed on,my car,very thin
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

Mopar Nut

#2
February 10, 2013, 01:38:41 AM
Same on mine too.
"Dear God, my prayer for 2024 is a fat bank account and a thin body. Please don't mix these up like you did the last ten years."

Daytona R/T SE

#3
February 10, 2013, 01:39:01 AM
Quote from: cdr on February 09, 2013, 07:31:38 PM
yes it looks brushed on,my car,very thin

Thanks,

That's what I was thinking... :scratchchin:

Anyone got pictures of an undisturbed original?  :shruggy:

mikeydf14

#4
February 10, 2013, 08:06:18 AM
Just replaced the quarter skins on my 68 a few months ago and they are the same as a 69 except for the side lights All of the old seam seal was factory so we did the same. Brush seam seal. You can see where the original seal is just to the inside of the new skin along the top edge.

Daytona R/T SE

#5
February 10, 2013, 09:47:52 AM
Thanks, Guys...

It's been 18 years since I stripped this piece of shit down to bare metal and the memory ain't what she used to be... ::)

mikeydf14

#6
February 10, 2013, 10:58:16 AM
 We all forget and I have asked for more help than I am used too so don't feel bad!  Good luck Daytona on your project. :2thumbs:

cdr

#7
February 10, 2013, 01:04:36 PM
Quote from: Daytona R/T SE on February 10, 2013, 01:39:01 AM
Quote from: cdr on February 09, 2013, 07:31:38 PM
yes it looks brushed on,my car,very thin

Thanks,

That's what I was thinking... :scratchchin:

Anyone got pictures of an undisturbed original?  :shruggy:


do you still need a picture??
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

Daytona R/T SE

#8
February 10, 2013, 10:20:10 PM
Quote from: cdr on February 10, 2013, 01:04:36 PM
Quote from: Daytona R/T SE on February 10, 2013, 01:39:01 AM
Quote from: cdr on February 09, 2013, 07:31:38 PM
Tyes it looks brushed on,my car,very thin

Thanks,

That's what I was thinking... :scratchchin:

Anyone got pictures of an undisturbed original?  :shruggy:


do you still need a picture??

Nope.

I'm good.

Thanks.
Print
Go Up Pages1
User actions