What am I and where do I go?

[Dmichels]

Ok this should be fun. Car is going back together well. I was going threw some parts and I am not sure where these parts go. I know the 2 in the middle go with trim, but where?
Thanks in advance for the help
Dave
http://i1358.photobucket.com/albums/q777/DaveMichels/IMG_2823_zps0709d06e.jpg

[tan top]

 check out this thread

http://www.dodgecharger.com/forum/index.php?topic=61147.0
they actually slide into stainless trim

as for the the first  & third part  , cant think where they go don't think second generation  , i striped my down to the last nut & bolt & clip & never had anything  like that on mine , although long time ago  

[Dmichels]

Thanks Tan Top
The larger of the 2 pieces may not be for the Charger but the smaller one is I almost want to say it holds wires to something. I think the stearing column? I am going to check right now

[Mytur Binsdirti]

The top piece looks like the retainer that screws onto the front underside of the front console plate.

[tan top]

The top piece looks like the retainer that screws onto the front underside of the front console plate.

 

 

[Mytur Binsdirti]

2 years ago, I tore apart & reassembled my Daytona & for the past 3 months, I've handled every disassembled part on my '68. Had I not been in that position, I wouldn't have known either. 


Unless it's an a/c part, the bottom piece does not look familiar at all.

[Dmichels]

thanks guys

[Charger-Bodie]

The bottom part I believe is a battery hold down, but not for a charger.

[twodko]

Those two small right angle pieces. I think help hod the bottom windshield trim in place.