Blower install 69 Charger

[pik20e]

Hello Guys,
I am installing a 671 Blower into my 69 Charger. Everything good so far. The only problem I have is that the wipermotorhousing is in the way. There is no other way, then tu pull the wipermotor out.
Does anyone know if there is a manufacturer who produces wipermotorhousings (smaller motors) witch would fit?
Or is there another possibility?
Thanks very mutch in advance guys.
Lots of greetings, Joe

[Cooter]

Might try the 3-speed wiper which is what the Six Pack cars used with the big ol Oval air cleaner. Two speed sticks out towards engine.

[Rolling_Thunder]

yep - convert to a 3 speed wiper motor and you'll be good to go

[Supercharged Riot]

I had a blower installed.
I did not have a wiper motor either

[pik20e]

Guys, thank you so mutch for the info. That brings me further!!!
Now if here would be someone to swap there 3-speed wiper  motor with mine 2-speed. Please let me know!!
Mine is in very good condition.
Greetings, Joe

[Chryco Psycho]

Kim @ Passion 4 mopars can help you out with the wiper motor

[pik20e]

Ok, I just removed the wipermotor, and will get a new restored one. (3speed)
About the switch. Right now i have a 2-speed switch on the dash for the wiper. Is it nessessary to chang the switch? Or will i be good with the existing one? I don't need 3speeds on my wiper in my opinion. Thanks so mutch for the help guys. Joe

[Chryco Psycho]

you need a matching switch , Slotts JS restorations may have the switch or Kim might also

[pik20e]

Okeydokey. Thankyou very mutch for your help guys! ;-)
Greetings, joe

[pik20e]

Hello guys,
everything went fine.
The Wiper Motor is in it's place and works fine.
Thanks again and lots of greetings to you all!
Joe

[Lighthorseman]

Ummmm...Pictures?   

[RCKSTR]

Ummmm...Pictures?