News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

68 tail light gaskets

Started by Dmichels, December 16, 2012, 10:08:48 PM

Previous topic - Next topic

Dmichels

OK so I decide to scrape the relitivly good gaskets from my tail lights, bad idea. I tried installing the repro gaskets and they suck I should have saved the old ones. Is there a source for good ones?
68 440 4 speed 4.10

twodko

Detroit muscle tech, Dante's auto, jack's auto, year one, ......
FLY NAVY/Marine Corps or take the bus!

Dmichels

have the YO ones They are not molded like the originals. They DO NOT fit
Thanks
68 440 4 speed 4.10

8WHEELER

All the repo's I have seen are just square foam, no contour at all. I do save my old original rubber gaskets ''if they are still OK''
and use them again. You have to be very carefull getting them out, so as not to tear them. I have evan given these used
sets to Friends that had the same problem. That is the good reason to save some pitted to hell tail lights, if the gaskets
are still looking good, save them and grab the gaskets.

A friend on this site took his tail lights out 6 years ago, and there was no gaskets at all  :shruggy:  yes the car had been
repainted.

Dan
74 Dart Sport 360, just for added fun.