News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Graveyard carz Daytona ***NEW PICTURES ADDED*** 4 UNCLE FESTER

Started by moparstuart, December 07, 2012, 12:42:43 PM

Previous topic - Next topic

Mopar Nut

Quote from: r4daytona on February 27, 2013, 09:53:27 PM
Damn Stuart, you're more up to date on pics than I am !  Then again, I forget to look.  I promise I will take LOTS of pics of all the cars when I'm there and post them in Aero and the Car guys discussion.  He got the fit on the doors pretty good.  I hope it's not too much work to re-do when he gets the new z braces from Rick Fairless. Mark didn;t mind that he kind of has to check the fit again -- somewhat.  If anybody ever has questions about the car or show feel free to call (716)549-1756 I live on the east coast so If you can try to make it before 10pm eastern.
Too bad we can't be tied into the new security cameras. We could help watch the shop and watch the progress on the cars ourself.
"Dear God, my prayer for 2024 is a fat bank account and a thin body. Please don't mix these up like you did the last ten years."

moparstuart


Ok mark needs to buy this  , it would be a great compliment or replacement to the caddy


                http://losangeles.craigslist.org/lac/cto/3637884723.html
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

hemi68charger

Quote from: moparstuart on February 28, 2013, 10:06:47 AM

Ok mark needs to buy this  , it would be a great compliment or replacement to the caddy


                http://losangeles.craigslist.org/lac/cto/3637884723.html


Post it on his facebook page Stu, that would be great.......... Mopar Hearst......
Troy
'69 Charger Daytona 440 auto 4.10 Dana ( now 426 HEMI )
'70 Superbird 426 Hemi auto: Lindsley Bonneville Salt Flat world record holder (220.2mph)
Houston Mopar Club Connection

moparstuart

Quote from: hemi68charger on February 28, 2013, 10:41:28 AM
Quote from: moparstuart on February 28, 2013, 10:06:47 AM

Ok mark needs to buy this  , it would be a great compliment or replacement to the caddy


               http://losangeles.craigslist.org/lac/cto/3637884723.html


Post it on his facebook page Stu, that would be great.......... Mopar Hearst......
i did already on all of them  , I have been on every craigs list in the nation lastly looking for a 392 for my nash 

GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

WINGIN IT

"If anybody ever has questions about the car..."

I have one, so when's she gonna be done? :D
Did they give you an idea?

r4daytona

I should have it by the end of June.  Planning on hitting Carlisle, Mopar Nats, Syracuse Nationals, Marilla   Of course lets hope for a dry summer because thats gonna be ALOT of driving!

r4daytona

Quote from: hemi68charger on February 28, 2013, 10:41:28 AM
Quote from: moparstuart on February 28, 2013, 10:06:47 AM

Ok mark needs to buy this  , it would be a great compliment or replacement to the caddy


                http://losangeles.craigslist.org/lac/cto/3637884723.html


Post it on his facebook page Stu, that would be great.......... Mopar Hearst......

So would that make it a Merst? :smilielol:

moparstuart

Quote from: r4daytona on February 28, 2013, 03:28:12 PM
Quote from: hemi68charger on February 28, 2013, 10:41:28 AM
Quote from: moparstuart on February 28, 2013, 10:06:47 AM

Ok mark needs to buy this  , it would be a great compliment or replacement to the caddy


                http://losangeles.craigslist.org/lac/cto/3637884723.html


Post it on his facebook page Stu, that would be great.......... Mopar Hearst......

So would that make it a Merst? :smilielol:
Tom tell mark to buy it :)
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

thehemikid

Hang on,...its fast! :D

moparstuart

GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

djcarguy

     great meeting ya an seeing what is now a very solid and soon to bee one awesome DAYTONA out in the world again.all my best an safe travels to you an soon your Daytona. :cheers: :cheers: :2thumbs: :2thumbs:  :popcrn:

moparstuart

GREAT NEWS FOR US FANS OF THE SHOW AND WING CARS


           GREAT NEWS!!! With the wild success of GYC season II, Velocity channel has officially licensed Graveyard Carz for Season III or G-3 I call it. We are in full production as we speak. We don't know when it will begin to air but when we know, you will know. Thank you to everyone that has helped me keep our Mopar dreams alive! ~Mark
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

ACUDANUT


r4daytona

Dj (david)  I was glad you stopped by, just felt bad I couldn't show you more and that Mark wasn't there at that time.  It was a VERY busy but fun week.  Wish i could have stayed another week to help more with assembling stuff.

This will be redundant to some but this is what i posted in the car guys forum;
Well, just got back from a week at Marks shop.  It was a blast.  Once I get my pictures resized I will post them.  I also took my video camera and had Mark do a small personal video message to all on this site.  THAT I will have to have a friend figure out and post to youtube.  Once I do, I will provide the link.  To all the guys in that area, I apologize for not contacting you bit it was really busy.  Next time I'm up should be a bit more relaxing.

I think most of you have the general idea about the show.  Yes he is a small guy doing this on his own with his own money for very little profit.  So yes of course you see sponsors that help in various ways.  IF you were in his shoes, you ALL would do the same to get the help needed to produce the show.  If you say you wouldn't you're lying to yourself.  One of the first things I asked Mark when I got there last thursday was "what the heck was up with last weeks episode"?  He chuckled and laughed and agreed that is wasn't that great but due to his agreement with Velocity and the fact that the parts he needed didn't get delivered on time he had to provide something.  But it was true, Daren was pissed.  SO instead of bitching, consider yourself a bit privileged on that bit of inside info.

My car looks great and will probably be painted in a week.  I did alot of grunt work ie: grinding welds, using the DA to sand the inside of my lower valance so when It's painted the inside will look smooth like steel. Went thru my pod of stuff to help with the inventory and lots of other stuff.  Also helped him with drywalling a building he needs to make for the whole editing part. 

As far a the owner being upset of those "incorrect" daytona wheels being impacted on and off the cuda,  I'm not.  First, the trims rings are safely tucked away along with the center caps and I realized (correct me if I'm wrong) the the very lip should appear black once the trim rings are on. I believe I'm correct because the rim should be painted black steel?  I think thats it anyway.  Second, here's why I'm not upset ... Mark didn't get them, I did, in fact here's the best part  Coker Tire gave them to me for FREE.  Tires, rims, valve stems, center caps and air.  All mounted and balanced and sent to Mark.  I made the contact, I made the promise to give them a plug so I"M not going to complain.  I couldn't be Happier.

You guys are correct that he does have two guys helping with the bodywork and he said he is going to show them more.  Mark and his guys (derrick and Lucky) were great with me because they had my nose fit perfect to the Z-braces that came with the car but I changed it and ordered a set from Rick Fairless. They re-fit the nose with the new braces and didn't complain once.

hemi68charger

Quote from: r4daytona on April 08, 2013, 11:44:28 AM

My car looks great and will probably be painted in a week.  I did alot of grunt work ie: grinding welds, using the DA to sand the inside of my lower valance so when It's painted the inside will look smooth like steel. Went thru my pod of stuff to help with the inventory and lots of other stuff.  Also helped him with drywalling a building he needs to make for the whole editing part. 


That's great you were able to work on the Daytona a bit, it is rather fullfilling to know you had a hand in it and can reflect on your time making it better. Nice to know the car will be painted soon. Outstanding situation that Coker gave you the tire/wheel combination and all you have to do is put a plug in for them......  :2thumbs:
Troy
'69 Charger Daytona 440 auto 4.10 Dana ( now 426 HEMI )
'70 Superbird 426 Hemi auto: Lindsley Bonneville Salt Flat world record holder (220.2mph)
Houston Mopar Club Connection

WINGIN IT

Quote from: hemi68charger on April 09, 2013, 10:55:49 AM
Quote from: r4daytona on April 08, 2013, 11:44:28 AM

My car looks great and will probably be painted in a week.  I did alot of grunt work ie: grinding welds, using the DA to sand the inside of my lower valance so when It's painted the inside will look smooth like steel. Went thru my pod of stuff to help with the inventory and lots of other stuff.  Also helped him with drywalling a building he needs to make for the whole editing part. 


That's great you were able to work on the Daytona a bit, it is rather fullfilling to know you had a hand in it and can reflect on your time making it better. Nice to know the car will be painted soon. Outstanding situation that Coker gave you the tire/wheel combination and all you have to do is put a plug in for them......  :2thumbs:
:iagree: , but I'm sure Larry wouldn't mind me comin' down to AR and putting my pink skin to work !  :lol:
And I'm a bit jeleous on the deal you got from Coker , I just bought  a whole set up from them ( rims, tires, center caps), and I'll I got was  a DC discount...  :'(  . Not that I'm complaining, of course, but free would be better  :yesnod: :icon_smile_big:

r4daytona

I may have gotten a deal from Coker, but it seems like you have a much better Daytona than i do.  I'd rather have the better Daytona!  Coker was great to deal with.  OK, I'll try posting some pics but I keep getting an error about already posting them?  These are also from the car guys forum.  Just a general question ... should I post the same thing in two different forums or does that waste your guys time?  Just wondering.

71ChallengeHer

You have to change the name of the picture to post it here and the aero section.  :2thumbs:

Budnicks

Looks like decent progress, good to see it's coming along nicely... paint in a week that's great....
"fill your library before you fill your garage"   Budnicks

Daytona Guy

Keep posting here - I'm not on that site.

Dane

held1823

Quote from: r4daytona on April 09, 2013, 01:38:16 PM
should I post the same thing in two different forums or does that waste your guys time?  Just wondering.

i hope you continue to post them here. some of us are aero snobs, and don't venture to the other pages.

Ernie Helderbrand
XX29L9B409053

r4daytona

None of us are snobs ! lol   Here's a few more  First is the frame rail they had to replace. They still have to finish grinding the welds and getting it to look as factory as possible,  Second shows a couple other cars in the shop but also my deck lid, fenders,  Third just a nose shot and fourth the underside.  If it wasn't for the XX in the vin, this car would have been scrap.

hemi68charger

Looking good Tom  :2thumbs:

Felt weird not having another episode of GYC's on TV last night.........
Troy
'69 Charger Daytona 440 auto 4.10 Dana ( now 426 HEMI )
'70 Superbird 426 Hemi auto: Lindsley Bonneville Salt Flat world record holder (220.2mph)
Houston Mopar Club Connection

r4daytona

It was odd not watching it.  I was watching the last episode with Mark, the guys and his wife at a pizza place last week, but I really didn't get in to it since i was thinking of a millon other things. To bad some people don't lighten, Mark and his family are great people, despite what they may see on the show.

WINGIN IT

Lookin good Tom, can't wait to see some paint ( bet you can't wait either) :yesnod: :icon_smile_big: