slainless steel trim installation

[440 magnum]

im istalling the stainless steel top of door trim and im assuming that there is a felt or gasget.  Since I didnt strip the car down before it was painted, Im finding Im having to solve a huge puzzle.  Also, the space bwtween the metal where the quarter vent post is inserted, is there a felt or gasket that goes between the metal and post so that there is no rattling of metal to metal contact?  Is there a gasket or felt between the stainless steel trim and top of door or is it just clipped in and metal will have direct contact?

[bill440rt]

The door belt molding just clips in, no gasket.
These are the windowfelt end seals that the glass end molding slides against:
https://www.yearone.com/Product/1966-74-a-b-e-body/fr3345

[440 magnum]

so these sealsare installed between the vent window housing and metal on door?  And is it 2 per side? I dont see these seals on 1969 service manual.  Is there another book out there with more details on installation or specific parts identified? 

[bill440rt]

No, those small seals go on the opposite end of the door, where the end glass molding slides up & down.
FSM is your best bet.

[b5blue]

I gotta get me some! 

[440 magnum]

Im sorry but I dont understand FSM. Is this literature, if so where do I find it?  Thank you for your help.

[Hemidog]

Factory Service Manual. Try Ebay.

[440 magnum]

thank you guys, I will look into this..........

[b5blue]

www.autobooksbishko.com  Call him he's a very good guy!

[Dino]

I got the CD off ebay, much easier than the book and easier to keep clean!

[440 magnum]

Thanks guys.  From what I see, I already have the service manual.  I thought that there may be more detailed literature with possible part numbers.  Looks like what I have is the best option. 

Excited about putting this baby back together!

[HeavyFuel]

Huge puzzle is right.  I took mine apart, bagged and tagged most everything, and it still feels fuzzy putting it together.

I think many of us love the cars and try to do as much as we can ourselves, but haven't done a bunch of cars, so it can be a struggle.

Good luck......this site is a good resource.....just stay clear of the GL threads.