News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Slapstick T-Handle screw

Started by MrSnicks, November 26, 2012, 07:43:02 AM

Previous topic - Next topic

MrSnicks

I'm piecing together the parts to install a console shift automatic setup in my 1971 Charger. Can someone show me the screw/bolt that attaches the T-Handle to the shifter mechanism?  Or anyone have pitch/thread/length?

Thanks,

Patrick

Nacho-RT74

it is the same pitch and lenght of the oval screws used underneath the console lid with fine thread. I lost mine once untill found those fit and used from an extra console I had.

The original actually is with smaller screw head, but these fit. You can take one of those as sample to take it to the shop
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

MrSnicks

I haven't purchased the console itself yet. I have the brackets to mount everything to the floor and the linkages, mechanisms for shifting.

Patrick