3 pin transmission plug

[Paul G]

Is there a reproduction plug available for the 3 pin transmission conector? The plug keeps falling off the switch on the side of the transmission. I think it is just old and hard, wont snap on to the switch anymore, just falls off. This for the transmission switch that does nuetral safety and reverse lights.

[nascarxx29]

Need this or whole harness
http://www.ebay.com/itm/Mopar-68-69-70-71-72-73-Charger-Roadrunner-Neutral-Safety-Switch-Harness-NEW-/360480922852?_trksid=p2047675.m1850&_trkparms=aid%3D222001%26algo%3DSIC.CURRENT%26ao%3D1%26asc%3D48%26meid%3D3393374391352010936%26pid%3D100011%26prg%3D1035%26rk%3D1%26sd%3D150914945952%26

[Paul G]

That is it. Thanks. I cant believe the price though, $33. Wow.

[nascarxx29]

Im sure there more than a ebay vendor that carrys it

http://www.autozone.com/autozone/parts/Neutral-Safety-Switch-Connector/_/N-9cjrd

[Paul G]

Well looky there. I have never seen one on the shelf at AZ. Must be special order. Thanks again.

[mauve66]

my original trans is gone and the one that mancini racing sent me has the 3 prong on it, i bet the 66 model didn't does it??  haven't looked under there in years. i guess i'm in for some hacking

[Nacho-RT74]

the full harness cost around the same. When I got the harness paid around $30 and the plug price was around $19-22... went with full harness.

http://www.evanswiring.com/catalog.htm

[John_Kunkel]

Be careful, some connectors on the market are made for the '78-later switch which has shorter pins.

[lasvegas69charg]

that is what happen to me. I just had my trans rebuilt and when I made the connection it wouldn't stay in. I went to auto zone and got another switch and it worked. After looking at the pins the az had longer pins.