A/C duct/hoses etc...anyone repopping them?

[tylerk]

All of my hoses and duct work are in shreds and I was wondering if anyone repops these pieces?
Be for a '69 Charger...much obliged!

[Brock Lee]

Have you checked the usual parts suppliers? I know they exist. I bought some from the Paddock before they closed.

[fy469rtse]

All of my hoses and duct work are in shreds and I was wondering if anyone repops these pieces?
Be for a '69 Charger...much obliged!

I was in the same situation, I just didn't' have any, tried making some up sort of close but no cigar, then I found not 100 percent but fits well kit from valley vintage auto parts correct ducting and then moulded ends to correctly connect to vents and centre divider , hope this helps, it's better than anything else I could find and I was stuck at this point for a while now

[mindless1]

I'm shopping for these right now, I think I'm going to try the universal ones from Dorman, I'm thinking the 2 1/2 inch should do (pn 96004).  If anyone has had better luck some other way holler...

[green69rt]

Is this what you're looking for??

http://www.megapartsusa.com/proddetail.asp?prod=102%2DDV5H

[fy469rtse]

I'm shopping for these right now, I think I'm going to try the universal ones from Dorman, I'm thinking the 2 1/2 inch should do (pn 96004).  If anyone has had better luck some other way holler...

try the kit from valley vintage auto parts, you don't have a lot of room, even these were a tight fit, and can't imagine a generic kit fitting any better

[fy469rtse]

Is this what you're looking for??

http://www.megapartsusa.com/proddetail.asp?prod=102%2DDV5H

that's the ones , not a bad fit , and good price too