News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

383 oil leak off top of head? Bad rubber gasket?

Started by DadsCharger00, October 17, 2012, 11:43:11 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

DadsCharger00

October 17, 2012, 11:43:11 AM
So stupid rookie question again (I'm still trying to learn here!) Just noticed that I had a little oil on the head, and across the top of the engine...not a lot. But some. And this is the culprit from what i can gather. So couple questions....first, what is this? and WHY is it leaking...and how can I stop it? Sorry for the silly questions...but thanks in advance for all your help and advice!

Cooter

#1
October 17, 2012, 11:52:12 AM
Looks like Seal gromment around PCV...They will never Completely stop what you see there. Cast valve covers are famous for this as well as Chrome stamped steel. Think of it as "Ant-corrosion" protection for those aluminum valve covers.
" I have spent thousands of dollars and countless hours researching what works and what doesn't and I'm willing to share"

ACUDANUT

#2
October 17, 2012, 03:07:47 PM
Welcome to the world of leaks.  it's no big deal, just wipe it down every now and then.

Just 6T9 CHGR

#3
October 18, 2012, 03:41:45 PM
IIRC there should be a baffle under the PCV to prevent oil slinging from rockers no?  Maybe yours is missing?
Chris' '69 Charger R/T

bobs66440

#4
October 28, 2012, 05:27:45 AM
Quote from: Just 6T9 CHGR on October 18, 2012, 03:41:45 PM
IIRC there should be a baffle under the PCV to prevent oil slinging from rockers no?  Maybe yours is missing?
Yes, there should be a baffle. It will leak without it. Check for a baffle and try a new grommet. They are cheap at Autozone. If you have a baffle and the grommet is good and it still leaks, you may have excessive blow by.
Print
Go Up Pages1
User actions