How to remove 2nd gen console?

[wLc]

I need some help. How do I remove the console in a 2nd gen? Advice, pics, links to other sites that show how, anything will help. Thanks in advance guys.

[AKcharger]

Hey WLC di you just get the car? This was my 1st question too...anyway it's simple:

1) Using a small allen wrench loosen lock nut on shifter handle so you can spin the knob
2) Turn the knob and black button counter clockwise till it comes off the shaft
3) Open console door and remove two phillps screws holding cover plate on...lift off cover plate (may have to move shifter to neutral)
You're almost there!!
4) Revove 2 ea. screws from inside console storage area and 2 ea. screws from the foward support (you'll see it when the foward shifter plate is removed
5) you have one screw on the drivers side carpet..you may have to "dig around" for it but it's there just foward of the light
6) Disconnect wire harness from body to console lights and carefully remove

Good luck!

AK

[wLc]

AK, thanks a lot. It was exactly like you said. Simple.