Trident screws and sockets for 2nd gen. gas caps "deal". GOT THEM?

[b5blue]

 From my previous topic on the size of these screws there is interest enough to attempt a kind of group buy. As I can buy 100 of them for 31.50 plus shipping and sockets (1/4" drive.) run 7.50 ea. plus shipping I ran into the idea it would be much cheaper for me to order a box of screws and a bunch sockets at one time to save on shipping for everyone. Shipping was 6.95 for orders up to 49.99 and 10.95 up to 100.99 so I can order 9 sockets and 1 box of 100 screws for 109.95 shipped.
Enough guys have responded to fill that order so far offered at 12.00 for 6 screws and one socket but with shipping and PayPal fees I'm cutting it VERY close to/or loosing money. I'm not trying to profit, I just don't need 100 screws. Anyone ordering just a 7.50 socket would pay 6.95 shipping and some vendors have a 25.00 minimum order. I don't mind mailing out a bunch of these for you guys but then I started adding up costs and we never addressed adding insurance or the best way to send like USPS, Fed-Ex or UPS. I'm thinking it would be easy for me to just mail by USPS all at one time and insure every packet.
If you guys are OK with 15.00 instead of 12.00 I think I can pull this off by ordering from "Tanner Nut & Bolt Corp.", buying a pack of bubble lined pack mailers and sending all insured USPS.
The last issue is length, some say 3/4" and Bull commented they may be more like 7/8th", Tanner shows 3/4 and 1 inch so I'd need a vote?  
 If your "in" post here so I can add up interest for a total, if you just want screws or more than one socket or more than 6 screws let me know also as I have to go by the total responds over about 30 days before placing my order.  
 We will see how this adds up and I will ask that all "in" PayPal me prior to me ordering to cover myself but wait till I give ya word to do so. I plan on contacting Tanner prior ordering to be certain of no back order issues or any other problems.
b5blue
 
 

[Lennard]

I'm in for a complete set.

[cdr]

just let me know

[bull]

I'll look at the screws I have in the cap now and see how long they are and how much of them is sticking out past the sheetmetal to try getting a more precise length. At any rate, I would like to have a set too. I was thinking of doing the same thing you are with this but got busy doing other things.

[Brock Lee]

Last I knew McMaster Carr had them for stupid cheap, like $10-15 per hundred.

[b5blue]

 Thanks guys! 

[Mopar Nut]

Count me in for a complete set.

Thanks

[b5blue]

  I checked McMaster Carr, they have "tri-wing" that is a 3 blade Phillips head, not Trident that matches OEM for us. Rats! I'm looking for the best value for HIGH quality, they are a good source for other stuff though.
  Thanks for checking length Bull! 

[69fourspd]

I would be in for a set as well.  Thanks for trying to get this together.

-Matt

[Brock Lee]

  I checked McMaster Carr, they have "tri-wing" that is a 3 blade Phillips head, not Trident that matches OEM for us. Rats! I'm looking for the best value for HIGH quality, they are a good source for other stuff though.

No, they have them. Maybe just in the hard catalog. I bought some a while back and they were exact. They were not the "tri-wings".

[rebby]

I'm in for a complete set as well.

[Dino]

I'm in for the complete set.  $15 is still on the way low end of usual Charger expenses.  That's what I waste in gas going to the store these days!

[green69rt]

I'd like a set.  Paypal is ready to go.

[twenty mike mike]

I'll take a complete set. Thanks.

[Charger-Bodie]

Id take some screws,but I have a socket already.

[b5blue]

I count 10 socket so far...

[richRTSE]

I count 10 socket so far...

i'm in too....1 socket/6 screws.

[HeavyFuel]

I'd like a socket and 3 screws. (uhhh....that didn't come out right)

Thanks.

[b5blue]

  I'm calling this week to confirm an order can be in stock for this week. I'll be asking for everyone to PayPal me within 7 days upon confirmation from Tanner that there will be no delays. Including myself I'm @ 12 sockets and there will be plenty of screws @ 100 per box (69 used so far.) 
  Look for "UPDATE" in the topic Mon. or Tues. for a status. 

[Charger-Bodie]

Sweet. I was wondering about these yesterday.  I'll take 12.

[green69rt]

Standing by,  just need a paypal account to send the money.

[Lennard]

Standing by,  just need a paypal account to send the money.

Same here for 6 screws and a socket.

[b5blue]

I'll have you all PM me for info after confirmation from Tanner. 

[cdr]

one socket 3 screws please 

[Mopar Nut]

I'll have you all PM me for info after confirmation from Tanner. 

Sounds good, thanks.