News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Trident screws and sockets for 2nd gen. gas caps "deal". GOT THEM?

Started by b5blue, September 22, 2012, 10:10:05 AM

Previous topic - Next topic

Dino

Extraordinary claims require extraordinary evidence.

b5blue

  Small delay, as the place is in Brooklyn the effects of Sandy have reduced their (3) web-sight line's down to two. I got through to them and they were to call me back. I waited till 5:30 and had to go. (Land line home phone.)
  I want to verify all of this order before requesting any funds from you guys so bare with me!  :scratchchin:

Ghoste


Mopar Nut

Quote from: b5blue on November 06, 2012, 06:39:39 PM
  Small delay, as the place is in Brooklyn the effects of Sandy have reduced their (3) web-sight line's down to two. I got through to them and they were to call me back. I waited till 5:30 and had to go. (Land line home phone.)
  I want to verify all of this order before requesting any funds from you guys so bare with me!  :scratchchin:
Don't rush, you're doing us a favor, thanks again.
"Dear God, my prayer for 2024 is a fat bank account and a thin body. Please don't mix these up like you did the last ten years."

Dino

Yeah no rush blue, the duct tape is holding my gas cap on just fine.   :icon_smile_big:
Extraordinary claims require extraordinary evidence.

gkeanef


b5blue

I got a rep. on the phone today, they "should" have a new shipment of the sockets within this week. Stand by for updates!  :scratchchin:

b5blue

  Well the sockets are in and I'm assured a box of screws is obtainable in 2 days. Everyone PM me here within the next week and I'll send you PayPal info.

  Bull and I are agreed that size #10 @ 3/4 inch length is ideal so that's what I'll order along with the sockets. If you just want the screws let me know how many in your PM to me, I've yet to figure that out but we'll keep it as cheap as possible. 

b5blue

  OK guys the ball is rolling so bare with me. 11 have responded and of them I have 6 who have cleared through PayPal as of this AM. (Thanks for promptness!) 4 who expressed interest I've not heard from yet so I sent them PMs to alert them.
  Some wanted more than the six screws I intended and some only need 3 screws so I'm working it out that if I confirmed more than 6 you'll get them. If you asked for only 3 screws I'll still try to send you 6 or split up what's left as we are getting close to depleting 100. (It will depend on if the the last 4 guys are still in.) 
  Please if your "in" PayPal me ASAP as the order will be based off received payments.

  I did check McMaster/Carr's sight but they get over 10.00 per socket ea. so the lower amount for a box of screws did not offset the total enough to save any money.

Lennard


Dino

Hey Neal, when did you receive my payment?  I sent it 11/10 @ noon but only received my paypal confirmation email @ 1:25 am today.  That's a bit strange, can't recall it ever took so long.
Extraordinary claims require extraordinary evidence.

b5blue

  The PayPal system is running slow for some reason.  :shruggy: I saw a bunch on the account yesterday that I did not get email notification of till this AM. You are good!
  Of the 14 I have as "in" I show 12 payed as of today (11/12/12) and have not heard back from HEAVY FUEL or gkeanef yet. I had hoped to order today as I'm off work but will wait till after work tomorrow as the cut off. I'm running out of screws anyway now. It's all working out as some only requested 3 screws and one socket and that count leaves room for the 2 not heard back from, but just barely.  :2thumbs:   

Dino

Quote from: b5blue on November 12, 2012, 08:29:03 AM
  The PayPal system is running slow for some reason.  :shruggy: I saw a bunch on the account yesterday that I did not get email notification of till this AM. You are good!
  Of the 14 I have as "in" I show 12 payed as of today (11/12/12) and have not heard back from HEAVY FUEL or gkeanef yet. I had hoped to order today as I'm off work but will wait till after work tomorrow as the cut off. I'm running out of screws anyway now. It's all working out as some only requested 3 screws and one socket and that count leaves room for the 2 not heard back from, but just barely.  :2thumbs:   

I'm glad it's working out.  Thanks for doing this buddy, much appreciated.   :2thumbs:
Extraordinary claims require extraordinary evidence.

b5blue

You are welcome! It beats us all paying 46.00 and having 97 screws with a one use socket leftover.  :lol:

  gkeanef just chimed in and we are waiting for HEAVY FUEL, PLEASE IF YOU RESPONDED GO TO PAYPAL.

Dino

Quote from: b5blue on November 12, 2012, 08:38:23 AM
You are welcome! It beats us all paying 46.00 and having 97 screws with a one use socket leftover.  :lol:

  gkeanef just chimed in and we are waiting for HEAVY FUEL, PLEASE IF YOU RESPONDED GO TO PAYPAL.

We'd be fighting for that one socket.   :lol:

Made heavy fuel had a heavy weekend?   :D
Extraordinary claims require extraordinary evidence.

b5blue

  OK The order is in, we have just enough screws to go around and everyone except HEAVY FUEL was accounted for through PayPal. I ordered 1 extra socket and reserved 3 screws for him just in case.  :2thumbs:
  A note of THANKS to members who only requested 3 screws, you let a few extra guys get in on this. By my count there is 1 screw extra! (That box better have 100!  :lol: ) I was assured that they can have the screws to ship to me within 2 days, that's the reason I didn't want to wait long.
b5blue

rebby

Curt Rebelein, Junior
1969 Charger R/T SE (500 Stroker/833/D60 w/XP VIN)
1969 Charger (440/727/8.75, GL Project)

HeavyFuel

Quote from: Dino on November 12, 2012, 08:40:45 AM
Quote from: b5blue on November 12, 2012, 08:38:23 AM
You are welcome! It beats us all paying 46.00 and having 97 screws with a one use socket leftover.  :lol:

  gkeanef just chimed in and we are waiting for HEAVY FUEL, PLEASE IF YOU RESPONDED GO TO PAYPAL.

We'd be fighting for that one socket.   :lol:

Made heavy fuel had a heavy weekend?   :D

Ha ha. 

We did have a major snow storm.....spent alot of time snowblowing (boy are my lips cold :icon_smile_big:) and shoveling.

I did get the car moved to the other side of the garage.  It's not under power....so that was interesting.    :P








b5blue

  Sockets and screws are in. All orders are filled and packaged, I'm just waiting for 2 addresses (PM's sent.)to ship the lot out. THANKS again to the guys that only requested 3 screws as we really cut it close!
  I tested the fit on my 70 Charger and it's perfect! You really need the socket to install or remove as the lip on the base of the Fuel cap and the edge of the filler tube trap the head of the screw nicely. Now I can start saving for a new cap and trim ring without worry of some jerk stealing it off the car.  :lol: 
  I'll let you know when they ship out. b5

rebby

Curt Rebelein, Junior
1969 Charger R/T SE (500 Stroker/833/D60 w/XP VIN)
1969 Charger (440/727/8.75, GL Project)

cdr

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

Dino

Extraordinary claims require extraordinary evidence.

b5blue

  Your welcome! I had just enough money to post and insure all packages (3.80 ea.) so please confirm delivery of your order with a PM to me with your full name included.  :2thumbs:
If any do not show up within 10 days I need to know so I can start a claim.   :eek2:

green69rt

Really excellent!!!  Thanks for your effort on this.  So you came out whole on the cost??? 

Lennard

Thank you for your time and effort you put in to this task. :2thumbs:
I will let you know when the goods are in.