66 charger clock mounting

[66chargeragain]

I just got a used console mounted clock for my '66 Charger. As it did not come with a clock, there is no mounting hole in the console. I am hoping some one could give me exact measurements as to where to drill.   

[kab69440]

Remove the console plate and flip it over. Take a good, sharp  1/4" drill bit and rout out hole mark and arc sweep marked near the front. Potmetal and aluminum are very soft. It only takes a minute or so.

[Ghoste]

And as an aside, if you have a 67 clock and not a 66 one, there is a bit of different wiring you'll need to make it work.  Well the lighting part anyway.

[66chargeragain]

So there is a mark on the underside, thanks. I have not yet removed the plate.

[ODZKing]

There is more than just a hole you will need.  Yes it is marked but there is also a plastic piece that mounts with 3 screws.  Let em find some pics for you.  Here is a pic of the kit.
BTW, if it has a white wire it is 66 and EL.  They also have different faces and hands.
Spring keeps it tight while still enabling it to pivot into the 2 positions provided by the plastic piece underneath.

[ODZKing]

66 vs 67 side by side

[Ghoste]

Cool, never knew about the different faces, thanks.