News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1968 Charger inner fender

Started by 469 runner, September 18, 2012, 05:50:41 PM

Previous topic - Next topic

469 runner

I hope this is the right place to post this question.  I am getting ready to have my 68 Charger painted and there are some questionable holes in the right inner fender.  This car has air conditioning and I've been able to account for most of these extra holes except for three just forward of the shock brace. 

Can anyone post a picture of this area?  Now is the time to weld up these holes if they were not factory.  Thanks so much.

cdr

show me yours & i'll show you mine :icon_smile_big:













that way i will know what area to post a pic of
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr