The correct size of 2nd gen. gas cap screws?

[b5blue]

Are they size 10 screws? I'm ordering tamper proof screws but need size and length for correct fit. 

[Ghoste]

About an inch long and yeah, about a 10 course thread.

[b5blue]

Thanks, I can get 1/2, 3/4 or 1 inch long but really would like just the right length. 

[Dino]

If you're talking about the three screws that connect gas cap and filler tube, this is what you want:

http://www.ebay.com/itm/1968-69-70-Charger-Anti-Theft-SCREWS-SOCKET-FLIP-TOP-/400231407379?pt=Vintage_Car_Truck_Parts_Accessories&vxp=mtr&hash=item5d2fa69f13

If you're going with philips then get then 3/4" long

[b5blue]

Yea Dino that's the ones. I can buy 100 of them for 31.50. Sockets are 7.50.   I just need the correct size.

[bull]

According to my information they are #10 x .75". Here's a source for them: http://www.alleghenybolt.com/tampruf.html

[b5blue]

Thanks!  When I replace my gas cap and trim ring I want to keep them!

[Dino]

Yea Dino that's the ones. I can buy 100 of them for 31.50. Sockets are 6.50.  I just need the correct size.

That's a pretty good deal then!  If you're ordering a truck load I'll take a set, I have rusty phillips screws in mine.  At one point I 'may' buy a new gas cap and trim ring.  Mine are in good driver condition but if and when I repaint the car I would like a better one on there.  I'm guessing the screws and socket do not come with a new gas cap though.

[b5blue]

I'll be posting for you guys prior to ordering to make a list of those who want some! 

[b5blue]

I just checked and it's 7.50 per socket for #10's. Shipping is by the order total @ 6.50 up to 49.99 and 10.95 for 50.00 to 100.00. (MOL) I could offer 6 screws and a driver socket for 12.00 shipped I guess?    I'd need to know how many sockets prior to ordering to cut shipping to me down. 

[cdr]

I just checked and it's 7.50 per socket for #10's. Shipping is by the order total @ 6.50 up to 49.99 and 10.95 for 50.00 to 100.00. (MOL) I could offer 6 screws and a driver socket for 12.00 shipped I guess?    I'd need to know how many sockets prior to ordering to cut shipping to me down. 

i'm in, let me know how much you come up with & how to pay you.thanx charlie

[Dino]

I'm in for the screws and sockets.  If you take paypal then make sure you add the percentage paypal takes so you actually get $12 or however much it turns out to be.

[66FBCharger]

I'm interested in a set of screws and socket. PM the details and where to send payment when you are ready.
John

[rebby]

Sign me up for a set as well. Thanks!

[b5blue]

  Guys I'll post a topic before ordering, enough of you have responded already to put me in the next higher shipping bracket. I want call them and double check availability/pricing in about a month from now. (I have a few bills to pay first.)   

[Dino]

  Guys I'll post a topic before ordering, enough of you have responded already to put me in the next higher shipping bracket. I want call them and double check availability/pricing in about a month from now. (I have a few bills to pay first.)   

Sounds good to me blue.  Don't know about the rest but I'm sure my phillips screws will last a while longer.

[cdr]

SOUNDS GOOD my gas cap is in a box ,no hurry

[Mopar Nut]

I'm in when you are ready.

[bull]

Actually, I think they are longer than 3/4" and shorter than 1" so, maybe 7/8" is right.

[VegasCharger]

I'm definately in and in NO hurry.

Thanks Blue, I think you hit a home run here!

[buckeyecharger]

I'm in too. You're my boy Blue!!!