News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Bulge Hood Scoop?

Started by ipstrategies, February 06, 2006, 12:33:19 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

ipstrategies

February 06, 2006, 12:33:19 PM
1971 Dodge Charger SE 383 Magnum
1999 Dodge Durango 5.9
1995 Chrysler LHS

andy74

#1
February 06, 2006, 01:39:14 PM
intresting

WM23N1

#2
February 06, 2006, 02:49:55 PM
Does it come with a bucket of bondo for installation?
1971 Super Bee 383 "The WM23N1" http://1971-1974dodgecharger.com/

hemihead

#3
February 06, 2006, 05:37:07 PM
To go with the bucket of Bondo that is in most "restored cars"    :devil:
Lots of people talkin' , few of them know
Soul of a woman was created below
  Led Zeppelin

TruckDriver

#4
February 06, 2006, 05:52:05 PM
Quote from: hemihead on February 06, 2006, 05:37:07 PM
To go with the bucket of Bondo that is in most "restored cars"    :devil:

Only if you buy a car from Halpig.
PETE

My Dad taught me about TIME TRAVEL.
"If you don't straighten up, I'm going to knock you into the middle of next week!" :P

ChgrSteve67

#5
February 06, 2006, 06:00:37 PM
Don't see a scoop only a bulge.
Are you suppose to cut the under side of the hood for more clearance?
Or is it a bulge like there is something under your hood.

Like the fact that its not the actual bulge but a plug for the mold.
Must need money in order to finish creating his bulge.

Think it fits in his pants?
Personally I'd rather scoop than bulge.

Ok you 71 thru 74 dodge charger guys is this reproduction power buldge scoop for real or did this guy make it up?

TruckDriver

#6
February 06, 2006, 06:03:52 PM
Thats something he just made up.  ::)
PETE

My Dad taught me about TIME TRAVEL.
"If you don't straighten up, I'm going to knock you into the middle of next week!" :P

WM23N1

#7
February 06, 2006, 06:05:38 PM
Yea I think its just something he made up. If I didint have the real thing i guess i might try it out.
1971 Super Bee 383 "The WM23N1" http://1971-1974dodgecharger.com/

ipstrategies

#8
February 06, 2006, 07:59:05 PM
I have no idea if it is real or not. I found it searching ebay and had never heard or seen of such a thing.
1971 Dodge Charger SE 383 Magnum
1999 Dodge Durango 5.9
1995 Chrysler LHS

haueter66

#9
February 06, 2006, 08:10:34 PM
It would take some work, obviously.  I think the hard part would be reinforcing the glass so it doesn't buckle... attaching to the hood probably would not be that difficult.  $200 is a bit much tho just to try something that may or may not work.  Someone needs to make something like that in a steel weld on... that would be sweet since flat hoods are a dime a dozen!

ChgrSteve67

#10
February 07, 2006, 11:41:41 AM
Just get some double sided tape.

Thats what all of the new aftermarket add-ons are installed with.
Print
Go Up Pages1
User actions