Lower ball joint removal

[charger Downunder]

Looks like i have to replace the right hand side one. Whats the best way / procedure to do this i have factory disc brakes and the right tool to remove it.

[Chryco Psycho]

pull the rotor , remove the two 15/16 bolts through the spindle & blall joint , remove the cottor pin & 7/8 nut & pop the joint out of the LCA

[b5blue]

I bought the tool to remove the ball joint stud from the knuckle, it's like a big bolt and nut. 

[Chryco Psycho]

make sure you have support under the LCA or back off the T bar adjuster

[charger Downunder]

Sounds easy thanks everyone. Well cars going on 90,000 miles and first time to be replaced. I had the other side done 20 years ago. It just goes to show they use to make things to last in the old days.

I bought the tool to remove the ball joint stud from the knuckle, it's like a big bolt and nut.
yep thats the one i have,