News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

I did 1 pass at test n tune

Started by metalstorm440, August 25, 2012, 06:02:30 PM

Previous topic - Next topic

metalstorm440

at norwalk ohio friday test and then my Hooker headers emblem came off after 22yrs the rivets finaly gave way.
http://www.youtube.com/watch?v=FfsmmbTNlBE&feature=plcp

I am going to weld it tomorrow but i did not want to risk causing dammage with the holes in the exhaust even though people said some hose clamps would have fixed it enough to make more runs.She ran 6.606/105.94 in the 1/8 then the air filter slid back causing a fuel problem,stumble enough for me to peddle it slowing me to a 10.56/118mph.

Me and the car after.

c00nhunterjoe


metalstorm440

Thanks!I hope to get out next weekend again.

Ghoste

I have never seen one of those come off before.  Never even really thought about it being possible. :lol:

tan top

Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

metalstorm440

Thanks,I wish i had the incar video but what my friend got from the stands will have rto do.To fix the exh holes i am going to cut off some sheet metal screws as a plug and weld over the top of them with my craftsmen 110v mig welder.

BSB67

Nice. 

"She ran 6.606/105.94 in the 1/8 "  Pretty serious steam....she'll go about 130 mph.

500" NA, Eddy head, pump gas, exhaust manifold with 2 1/2 exhaust with tailpipes
4150 lbs with driver, 3.23 gear, stock converter
11.68 @ 120.2 mph

DC_1

Very nice

Did you end up beating that Camero?, couldn't tell in the vid

metalstorm440

My car ran 136/10.14 last yr but the carbs would not let me stage like i want so this was my 1st outing this yr to adjust them so i will get them close next time out which may be the mopar finals at norwalk and at that point i hope to be 9.80/140 with factory iron 346 heads and 14# boost at 3900 lbs.

Ghoste

I didn't know Norwalk was 1/8 mile.

metalstorm440


Ghoste

Thats what I thought.  I think I'm understanding it now though, because you got out of it, the 1/8 mile results were the only notable ones on the time slip?

metalstorm440

You got it!This darn 3 circuit carb is driving me nuts.I just jetted down in the intermediat circuit but my LM-1 is actingup.  :brickwall:

rt green

third string oil changer

adauto

Looked like the cumarrow red lighted. See the (-) minus sign in the video.... 
Never too many! 70 Chally R/T Convert-70 GTX-68-69-74 Charger-68 Dart GTS

http://a-dauto.com/  http://www.facebook.com/pages/A-D-Truck-and-Auto-Parts/67427352555?ref=hl

metalstorm440

That was in time trials on a test tune night.I did get out last wk and ran a 10.13/135 1.53 60' 109.45 mph 1/8 6.49
Here is the run at the Mopar Finals at Norwalk.
http://www.youtube.com/watch?v=UPeXFz7U7R8&feature=plcp


JB400

Real good reaction time.  Low 10's ain't bad either.  Good luck at your next run :2thumbs: :2thumbs:

metalstorm440

Quote from: stroker400 wedge on September 25, 2012, 03:46:33 PM
Real good reaction time.  Low 10's ain't bad either.  Good luck at your next run :2thumbs: :2thumbs:
Thanks but the reaction time is bad for my useual [.050 under].I hope i can get out again but you never know about the weather.My goal has allways been to go 9.90 with my 3900# car/driver so that is only a few timing * away and a better 60'.I have been 1.41 60' with 8# of boost so i know i can get it.I found the low/reverse band 4turns out and slipping so i adjusted that[2 turns out] and it should help.

JB400


BBKNARF

 :2thumbs: keep us posted on how you did.
68 Charger, slowly in the works, 451 c.i. approx. 535 hp @ the flywheel, so far best time in the 1/4
11.21 @ 119 mph, full exhaust, stock suspension, 4:10s @ 3640 pounds.

firefighter3931

Quote from: metalstorm440 on September 25, 2012, 02:35:03 PM
That was in time trials on a test tune night.I did get out last wk and ran a 10.13/135 1.53 60' 109.45 mph 1/8 6.49
Here is the run at the Mopar Finals at Norwalk.
http://www.youtube.com/watch?v=UPeXFz7U7R8&feature=plcp




Very nice Mike....impressive for a stock stroke 440 with iron heads  :2thumbs:


Ron
68 Charger R/T "Black Pig" Street/Strip bruiser, 70 Charger R/T 440-6bbl Cruiser. Firecore ignition  authorized dealer ; contact me with your needs