What have you done with your Charger lately?

[Musicman]

I picked up a new crossmember for my restoration through Summit. 

[Fred]

Changed the coolant and sparkplugs.

[myk]

Went outside, looked at the car and noticed the bright green puddle underneath it. 

*Sigh* I think a new waterpump is in my future; I might try that Milodon that Ron is always talking about...

[white]

put the challenger in the garage next to the 68 r/t charger. Boy the challenger looks bigger than the charger.

[Bob T]

Took it away while I did a course out of town , did another 400 miles 
Crap weather though, but the gas will still be cheaper than next month

[rt green]

pulled the new unfired engine out, and putting in a different cam.   rechecking my work from a few yrs ago. was drinking high lifes and watching barret Jackson during assembly.   we'll see if I was paying attention. cant risk running this engine if i'm unsure of even my own work.also want to do some headwork to the stock heads.

[poppa]

...threw in an aftermarket 6 pak.

[Musicman]

Nice, and a fuel log too. 

[mauve66]

where'd you get the fuel log??  i'ce seen one for 2 4 bbl's but not a 3 holey, always hated the convoluted arrangement on the stock carbs

[poppa]

It came with the 6 pak. It looks like it would be pretty easy to make ,if you could get the hole through the center straight. Should be able to pick up some "hex" shaped aluminum at a metal place.

[el dub]

Getting the paint started finally.

[poppa]

Looks nice   

[el dub]

Thanks, its looking better than it used to for sure.

[SUPERSTAR14]

I made mine more comfortable in the shop..................I finally got my central air up and running!  No more sweaty nuts.
Or bolts

-Pat

[Musicman]

 

[el dub]

Some more bodywork and etch primer. Should be able to shoot some primer on Saturday.

[bill440rt]

'70: Changed the trans mount, & manifold to head pipe gaskets. (Had to drop the exhaust to change the mount.)
'68: Changed the left door upper hinge. Also have a new set of repro rear window inside trim moldings to go on and a replacement driver's side vent cable.
'69: Still...waiting...to...get...my...aftermarket...seats...finished. 

[MrSnicks]

Installed new pitman arm, stripped/painted drag link, new tie rod ends and PST solid tie rod sleeves.

Patrick

[GordonGriggs]

Paint yesterday, Wheels and tires today. 440 Black racing stripe after paint has settled and I can get somone to help me put it on.

[dodgey68]

Just fitted electronic ignition, for the second time,, ,,, had issues with dizzy then module,, now all good,, so far

[myk]

Good work, everyone.  You should all be proud...

[nvrbdn]

actually put gas in my new tank. didnt fire it up yet because i was working on my truck. will fire it up with the new tank and the new carb this weekend.

[Wicked72]

I looked at mine the other day....

[JB400]

Just cleaning parts.  Found out I have one chrome door latch and one unplated one.

[RIDELIKEHELL]

Installing a mini starter and blanket,beefing up motor mounts on my control freak front end & rebuilt my 727