What have you done with your Charger lately?

[Musicman]

Mounted my 67 Scoop from SledCity onto the hood 

[ODZKing]

I called it names after I came home to find a small puddle of coolant under the car...over a week after putting it on stands.  Why it decided to leak now is a mystery to me.  The leak is coming from the block where the lower hose attaches.  It looked like the coolant got pushed up and then ran down the hose.  Weird.  Oh well, I'm yanking the engine this fall anyway so what's another leak...

It's not a leak, it is marking it's territory.   

[BrianShaughnessy]

Sinnamon got more sanding... then more primer

[cdr]

SINNAMON is lookin awesome !!!!!!

[keith88]

I added a CB antenna to the trunk to replicate the General as well i added a general lee license plate holder from Cooters and changed the thermostat to a 160 because it got warmer than i would like when i went to a cruise the other night while in stop and go traffic. Taking it to work tomorrow to test it out going to be in the mid 90s.

[Dino]

I called it names after I came home to find a small puddle of coolant under the car...over a week after putting it on stands.  Why it decided to leak now is a mystery to me.  The leak is coming from the block where the lower hose attaches.  It looked like the coolant got pushed up and then ran down the hose.  Weird.  Oh well, I'm yanking the engine this fall anyway so what's another leak...

It's not a leak, it is marking it's territory.   

   

SINNAMON is lookin awesome !!!!!!

She sure is!   

[WHITE AND RED 69]

Mounted my 67 Scoop from SledCity onto the hood 

Hood looks badasss! 

[67440chrg]

The Hood looks great. I went a little overboard.

[jaak]

Musicman, I dig that hood... good work!  Is that scoop made for a Gen 1 Charger? Looks nice the way the bodylines match up.

Jason

[Musicman]

Thanks guys 
It's the standard 66-67 RO/WO style scoop 

[grdprx]

I installed a new PowerForce harmonic balancer and took the opportunity to replace my plastic flexi fan with a metal viscous fan as I had it off the car.
Question, is this the proper clearance from the radiator for the fan?  It looks to be a 1/4" clearance...

[Musicman]

I made up a Debris Screen for the hole cutout in the hood this morning.

[6pkrtse]

I drive the heck out of mine. Drove mine to work on Saturday. One of the guys I work with took the picture & emailed it to me. They don't believe I drive it as much as I do. Like I tell them doesn't do any good sitting in the garage. 

[NHCharger]

Question, is this the proper clearance from the radiator for the fan?  It looks to be a 1/4" clearance...

Damn, that is cutting it close. I always figured 3/4"-1".

[Bronzedodge]

I thought about 1/2" was the rule of thumb.  I would be worried about it that close.  On the other hand, the fix is a different fan clutch?

[grdprx]

I took the fan off, too close for my liking. I'm going to order the shorter shaft Hayden clutch. Hopefully that gives enough clearance.

[lexxman]

Well I got the new wiring installed and plug wires. Won't be long and I will be able to start it again.

[Lewis]

I removed my steering column of my 73 charger as it sheered off at the u joint, I am going to machine the end of the joint down to make it fit a new joint so I don't have to buy a new column as I can't locate one at all in the UK!!!

[ODZKing]

I removed my steering column of my 73 charger as it sheered off at the u joint, I am going to machine the end of the joint down to make it fit a new joint so I don't have to buy a new column as I can't locate one at all in the UK!!!

Before you do that, you know the "Rag Joint" as they call is is available as well as all the steering hardware.
http://www.bouchillonperformance.com/inc/sdetail/1015/1025
http://www.bouchillonperformance.com/power_steering_hardware
May save you some time and a lot of work

[Lewis]

Thank you that is kind of you to reply, in my case it won't help me as previous owner has bodge the steering for instance at the bottom of the steering column is a u joking that connects straight to the steering box it been changed to non power steering so contemplating repair or replace to power steering not sure yet, but thank you for the help

[NZCharger]

New carpet kit installed
Brakes ballanced , exhaust leak fixed , hi rear stop light installed , front brake hoses replaced

[myk]

I like the idea of a high mount stop light.

In any case, went to a cruise last night and rolled the boulevard but didn't stop and hangout like I usually do; I think I'm over the car show season already...

[1st_charger]

set her back down on all fours so I can roll her around to her new garage stall with more space to work.

[keith88]

 Fixed my headlight doors  by changing them to electric motors.

See videos here:(Out side shot)
https://www.youtube.com/watch?v=hdBka_xkk3I&feature=youtu.be
And here: (inside shot)
https://www.youtube.com/watch?v=N-IIesICQVg

[timmycharger]

Getting closer to getting it started, its looking much more crowded in there!

Got the AC lines sorted out last night, just a few more things to square away.