Reattaching plastic trim to metal

[Ghoste]

If you need to attach plastic trim to metal, would a two part epoxy be a correct adhesive?

[tan top]

 
depending what your sticking , if its like soft lower dash trim etc
 would use      windshield  glue - pu sealer -sickoflex  ,  stick anything to anything &  stays slightly flexable , once its stuck on with that its never coming off ever


pratice first getting use to using it on test piece cause ,  if you get it where  you dont want  , its a night mare ,  wear gloves too ,

[Ghoste]

This would be exterior trim and its a hard plastic.  More like a body side molding or roof rack material.

[twodko]

Ghoste,

3M yellow or black snot will stick anything to anything and stay pliable.

[Ghoste]

Is that something I should look for at an autobody supply specialty place or will any autoparts store likely have it too?

[twodko]

Auto body.

[tan top]

This would be exterior trim and its a hard plastic.  More like a body side molding or roof rack material.

yeah stick that , only thing is if on not on a flat surface  ie on the side of the car etcetc , will need  clampint in place  some how , as it will take at least 4 prolly 5 hours to set  best leave it over night , if the mounding is heavy

[Ghoste]

Perfect, thanks guys.

[elacruze]

Yep 3M Weatherstrip Adhesive. Black matches better and the yellow stuff turns brown after suntanning if you leave any poking out.