1968 Charger Ant. Placement Help !!

[Mopar Crazy]

I put a new set of fenders on my 68 Charger from AMD... Great stuff. Had the car painted, and bought a new antenna for it at Carlisle. Went to put in on and realized that there is no antenna hole in the pass. fender.. 

Does anyone have any templates, or pics of where, and what size this hole should be Also I'm real concerned about putting a dent into the fender while drilling, what I should use to cut this hole ??

Thanks
Peter

[Indygenerallee]

  Isn't it funny, when I saw that on my 69 AMD fender set I was happy!! I said yes!! one less thing to shave!!! do you not have your old fenders??? If so make a template (or have someone with a OEM fender) trace the hole and indentions, plus the measurements front, back, side to side.. and use a hole saw the correct diameter, you will have to cut two small indentions on each side for the bezel but that would be easy with a dremel tool with a small grinder.

[440]

So your saying the antenna shouldn't be in the trunk lid  

[Mopar Crazy]

No,  I don't have the old fender, that would have made life too easy.....    AND YES, the antenna should not be on the truck lid....

[b5blue]

Mine is off and it looks to have an extra layer of steel under there for extra support!  (I hope yours has it "built in".) I can take a pic tomorrow and/or make a "rubbing" on a piece of paper as a template for you? (Mine is a 70 if that matters.)

[Mopar Crazy]

Ok thanks.   Anything would help at this point..

[b5blue]

PM your address to me.

[b5blue]

I'll send you this....

[Mopar Crazy]

PM sent.. Thank You

[b5blue]

In the mail Monday!