Brake light switch issue

[kwcharge]

Does anyone know a part number for a brake light switch for a 69 charger with cruise control. All I can find are 2 wire switches and the one thats on it now has 3 wires coming off of it. I believe that the cruise control requires a different brake switch.

[nascarxx29]

Try this guy   gtx6970


Re: Questions on wipers and cruise control

« Reply #34 on: July 20, 2012, 09:03:28 AM »

Quote


--------------------------------------------------------------------------------

Be warned - parts for the Factory cruise systems for the 1969 and older cars are nearly extinct, servo and stop lmap switch especially.
The early servos have 2 vacuum nipples on them 1970 and later only has one.
Servo mounting brackets are unique to body style, and not super hard to find ( I think I have a used one here if you want pictures )

stop lamp switches for the 69 and older cars is nearly impossibile to find, ( i have a used one here if you want pictures)

If want to add a system, it would be so much easier to locate and install a 1970 and later setup .
I have an nos servo and nos stop lamp switch along with a used cruise only stop lamp switch mounting bracket

[kwcharge]

The servo on mine has only one vac nipple so it must be a 1970 or later cruise unit. This car did not come from the factory with cruise but has it now. So i guess I am looking for a 1970 or later brake light switch which has the two spades on one end and also the pig tail on the end. Anyone know a number or where to get one of these?

[nascarxx29]

Can a 82 -83 with 3 wires be retro fitted
http://www.thepartsbin.com/guides/chrysler/imperial/brake_light_switch.html

[kwcharge]

Can a 82 -83 with 3 wires be retro fitted
http://www.thepartsbin.com/guides/chrysler/imperial/brake_light_switch.html

Yes that is basically what I have now and I can just change the plug. Thanks