1969 Fuel System Questions:

[XS29L9Bxxxxxx]

Is the filler tube a "slip-fit" design, or does any type of clamp hold the tube into the rubber gasket?


Also, where does the vent tube (which runs parallel) run to? It starts at the top of the filler neck, then down to??? 

[Fred]

Yes the filler tube is a slip fit, no clamp needed.
The vent tube runs down the filler tube through the trunk floor through the grommet hole into the sub frame and then into the atmosphere.

[tan top]

Yes the filler tube is a slip fit, no clamp needed.
The vent tube runs down the filler tube through the trunk floor through the grommet hole into the sub frame and then into the atmosphere.

[XS29L9Bxxxxxx]

You guys are awesome! Thanks!!