News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Q about center link - 72 charger

Started by Peters02, June 24, 2012, 03:23:13 PM

Previous topic - Next topic

Peters02

Question.
the center link on my 72 installs w the curve to the back to ensure clearance w the oil pan.  got that.
what i am curious about is the curved ends....looks like one end has a bit more curve to it that the other.  what side does the greater curve go to - pitman arm side or driver's side?
it can fit either way, but am wondering if that little more curve can throw off the geometry and cause it not to return to center when taking a turn.

thanks
Peter

Peters02

Ok - not sure how to delete this but found my own answer.  The taper of the holes on the center link determine the orientation.


Chryco Psycho

the curve should be down & to the rear I believe .