Hood Latch Striker Panel - Repop?

[1970Moparmann]

Just looked on AMD's website and Yearone and don't see it.  Does anyone know if it exists?

I was just on the Hot Rod Power Tour and during a "fly by" the wind got strong and my hood latch brace started to bend and my hood raised up a few inches   Did a temp fix but need to replace ASAP.

[Lennard]

Is this what you are looking for? If so, I have one on my parts Charger in great condition.

[Lennard]

I take it you don't need mine?

[1970Moparmann]

Lennard,

Sorry for the late response.

I literally just took the picture of what I need and sent it to my email prior to getting on to leave you a message. 

Mother Mopar must have changed the design in 69, because this is how mine is-

[Lennard]

My mistake, I assumed since your forum name is 1970Moparmann and you have a '70 Charger as your avatar pic that you needed one for a '70 Charger.
I don't have a spare for a '69, sorry.

[1970Moparmann]

I'm fortunate to have two Chargers.  A 70 and a 68.  This is for my 68.

Thanks anyways..

[moparfan53]

Just looked on AMD's website and Yearone and don't see it.  Does anyone know if it exists?

I believe the piece you want is part of the grille support/frame that AMD makes. If I am mistaken hopefully someone will correct me.

https://www.autometaldirect.com/store/productdetail/151-2668/68-9-Charger-Grille---Headlight-Support?view=productdetail&stockNumber=151-2668&BOMReference=&selectedcat=&prod_cat=&desc=68-9-Charger-Grille-/-Headlight-Support

There is an NOS top piece only on ebay, but it needs some rust removal work.

http://www.ebay.com/itm/350157221134?ru=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_sacat%3D0%26_nkw%3D350157221134%26_rdc%3D1



P.S. As you probably realize by now, if you don't specify a year & model in your original post, then it is reasonable for anybody reading to use your user name & avatar as a guide to what you are working on.  

[1970Moparmann]

Just looked on AMD's website and Yearone and don't see it.  Does anyone know if it exists?

I believe the piece you want is part of the grille support/frame that AMD makes. If I am mistaken hopefully someone will correct me.

https://www.autometaldirect.com/store/productdetail/151-2668/68-9-Charger-Grille---Headlight-Support?view=productdetail&stockNumber=151-2668&BOMReference=&selectedcat=&prod_cat=&desc=68-9-Charger-Grille-/-Headlight-Support

There is an NOS top piece only on ebay, but it needs some rust removal work.

http://www.ebay.com/itm/350157221134?ru=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_sacat%3D0%26_nkw%3D350157221134%26_rdc%3D1



P.S. As you probably realize by now, if you don't specify a year & model in your original post, then it is reasonable for anybody reading to use your user name & avatar as a guide to what you are working on.  

I've been searching on the site and didn't even think about looking at the whole assembly.   THANKS!

Yeh, I hear what your saying.  I must have been drinking the night of the post.

Looks like ANOTHER AMD piece will be going on my car.  I might change the name of the car to KIT CAR.