News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Ball Joint / Tie Rod Direction

Started by Chucky3, June 12, 2012, 01:47:00 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Chucky3

June 12, 2012, 01:47:00 PM
Hi !. I have a simple question - Which way do the tie rods go? I believe the ball joint that spins clockwise (in the sleeve) goes on the spindle side and the counterclockwise one goes to the drag link. Is this correct gurus? Thank you!

John_Kunkel

#1
June 12, 2012, 05:32:38 PM

Yes, the right-hand thread goes to the spindle side.
Pardon me but my karma just ran over your dogma.
Print
Go Up Pages1
User actions