News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Request for picture of carburator springs

Started by napalm_217, June 07, 2012, 06:40:19 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

napalm_217

June 07, 2012, 06:40:19 PM
I am putting my 1969 charger 440 magnum engine back together after having to pull both heads to find a threaded stud that fell into one of the cylinders. I have the car all set up and it runs but the accelerator is a lot harder to move now than it was before. I'm not sure I have the two springs on the drivers side of the carb attached correctly. If anyone has a close up of the where the two springs are supposed to be attached at I would greatly appreciate it

Just 6T9 CHGR

#1
June 07, 2012, 06:49:06 PM
Which carb?  Originally only one spring was used

Carter?



Holley?
Chris' '69 Charger R/T

napalm_217

#2
June 07, 2012, 08:24:13 PM
Its a Carter AVS 4682S, that might be useful to know.

maxwellwedge

#3
June 07, 2012, 08:42:44 PM
Quote from: napalm_217 on June 07, 2012, 08:24:13 PM
Its a Carter AVS 4682S, that might be useful to know.

69  383 Automatic Carb.  Go by the first pic.

Should be one big spring for carb and a small skinny spring for the auto trans kick-down linkage.

I gotta pic here somewhere.   Any A/C?

napalm_217

#4
June 07, 2012, 09:03:16 PM
Ah the kick down lever, that must be what the smaller/longer spring is for. Thanks guys.
Print
Go Up Pages1
User actions