Carb Question

[Lizey]

Will a Thermoquad carb set up for Lean Burn work on a car that has been converted to an electronic ignition?

[Cooter]

Without the Lean Burn computer, it will run half a$$ at best. Mixture control solenoids, and tamper proof idle screws are problematic.
Need to find a Pre-Lean Burn T-Q. I recommend something like an Edelbrock carb. to save hassles.

[Lizey]

Ok thanks. I found a carb locally that was pulled off a running 1969 Dodge Coronet with a 440. Another Thermoquad. Will this one bolt up?

[Cooter]

Should, but the CFM rating might be a little big for a small block.

[resq302]

A 69 coronet with a 440 would have had a Carter AVS, not a Thermoquad on it if it had the correct carb on the car when you removed it.

[Lizey]

I know nothing of the car it came off of, I just know the guy I talked to had a Thermoquad from a 440 and he said it came off a 69 Coronet.

[471_Magnum]

Here's a very good guide on thermoquads which will answer 99% of the questions you might have:
http://members.shaw.ca/crussel/thermoquad/tqguide.html

[crankypat]

  i have a holley 4 barrel on 383 mag motor. trying to get rebuild kit or carb... #s dont match at all..............................goes  0910    then below  list 4367-1    

[oldkimmer]

..............Try ur lean burn carb.....it should work good with maybe alittle tinkering........kim......