318 block question.

[whitehatspecial]

What, if any, are the differences between a 318 block and a 340 block?

[Chryco Psycho]

not much really just bore size , & no you cannot bore a 318 block over 4"

[Beer]

not much really just bore size , & no you cannot bore a 318 block over 4"

Yep thats what my machine shop stopped me at, makes for a great 402 though 

The new and improved 318 to 402 Stroker 4" bore 4" MP Forged Crank 414 HP and 466 ft/lbs Torque...not bad for a old 318...

[ChargerSG]

That is not bad for an old 318 , have you put it in yet?

[terrible one]

Nice looking engine. Got a power estimate?

[Beer]

I test fit it last month to check the oil pan clearance and then pulled it out again, the car will hopefully be painted March/April/May sometime and then I will start reassembling it.

Here's the thread on the build
http://www.dodgecharger.com/forum/index.php/topic,283.0.html

414 HP and 466 ft/lbs Torque...at the crank dyno sheet and vid at build thread.

Beer

[deathcharger71]

is that power with the air gap?

[Beer]

Yes, the full Edelbrock package, Performer RPM Heads, Performer RPM Cam, EPS 800 Carb, and Performer RPM Air Gap Intake (I have a second Air Gap intake set up for Direct Port N2O too).

Part numbers are in the build thread.

[terrible one]

Cool deal man