News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

rear center section

Started by mopar0166, May 16, 2012, 07:35:38 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

mopar0166

May 16, 2012, 07:35:38 AM
Any one know the torque for the center center nuts>   :shruggy:

mopar0166

#1
May 16, 2012, 07:35:59 AM
the exterior mounting nuts

Dino

#2
May 16, 2012, 02:09:18 PM
I believe it's 45ft/lb

I didn't have a torque wrench handy when I did mine so I used some rtv and just tightened them down firm but not too crazy.  They're small bolts and it's too easy to snap them off.
Extraordinary claims require extraordinary evidence.

Chryco Psycho

#3
May 16, 2012, 02:57:19 PM
3/8" stud , fine thread 35 lbs

Dino

#4
May 16, 2012, 03:00:15 PM
Quote from: Chryco Psycho on May 16, 2012, 02:57:19 PM
3/8" stud , fine thread 35 lbs

OP listen to this guy, I don't know what I'm talking about.   :icon_smile_big:
Extraordinary claims require extraordinary evidence.

Chryco Psycho

#5
May 17, 2012, 09:31:07 PM
the Rod bolts are the same size & thread & torque to 45 lbs but I doubt the studs in the diff are extremely high strength steel like rod bolts , safer at 35
Print
Go Up Pages1
User actions