Converting amp gauge to volt gauge

[70 Charger RT]

Has anyone replaced the dash amp gauge to a volt gauge on a 2nd gen Charger?  I'm thinking of going to the junk yard and salvaging a late 70s or 80s mopar volt meter and using the guts to adapt it to the amp gauge case.  Anyone done this?  How did you convert yours?

[ChargerST]

There u go: http://board.moparts.org/ubbthreads/showflat.php?Number=7244654

[70 Charger RT]

Thanks for posting this.  It's exactly what I want to do.  That's one way to reduce that common fire hazzard at the bulkhead connector.

[tan top]

There u go: http://board.moparts.org/ubbthreads/showflat.php?Number=7244654

exactly what i done  ,     had to cut the back of  metal  gauge cluster , directly behind the amp meter more than i was expecting , but done away with the fire hazard  with  the mopar amp gauge set up .
not as it you can see when the gauge cluster  is in ,  but may redo it one day 

[Bigtree]

I used a Sunpro CP7985 and adapted it to my gauge front. See Pics or Mopar Action Dec 2008 "Meter Maid"

[Charger RT]

check out this thread
http://www.dodgecharger.com/forum/index.php/topic,91438.0.html
Tim