I Had A Thought A While Back.....

[A383Wing]

....and I finished it last weekend

Probably ain't gonna take a real genius to figure out what it is and what it's copied from

Bryan (my brain cell hurts now)

[/quote]

[Finn]

Very cool!! Were you planning on making more and if so, how much??

[A383Wing]

I'm not sure how marketable this would be....this clock cost me $35.53 with shipping to me. This clock is 14" in diameter...I could have done a smaller version, about 8" or 9" if I remember correctly, but the outside ring was black instead of silver like the Charger dash really is.

So the clock came to me put together, so I had to take it all apart, remove & paint the hands orange (they came black), then reassemble the clock again.

Thinking back now, I suppose I should have scanned a 66 Charger clock face lit up and made one from that. I made one from the speedometer head of my little Metropolitan face, (see pics below), so I did the same with the Charger speedo.

I can check on the smaller clocks with the black body around the edge, it would be cheaper, but by the time they come to me, and then shipping to you guys...it may not be worth it to anyone else

I welcome ideas here

Bryan

[Fred]

I'd have a hell of a time with one of those.............. 
And if you're dyslexic you don't stand a chance!!

[draftingmonkey]

I had a thought too but the wife  and I forgot. Yours is better anyway. Those clocks are cool looking.

[Back N Black]

Very cool! 

[aussiemuscle]

Hey, it's quarter past 70mph!! 

[Ghoste]

One of my favorite times.   

[twodko]

Thats a Clever idea and they look great. Are the clocks you bought for them fit-ups or whole clocks? The reason I ask is because I've bought several clock fit-ups for small case pieces I make. Easy to fit.  

[A383Wing]

they are whole clocks....the Charger one comes to me complete as pictured, I just gotta take it apart and paint the hands orange like the speedometer needle in the OE dash

The little metro clocks are store bought and I print out the speedometer face on my printer and then take those clocks apart and in-lay the face and paint the hands white like the OE Metro speedometer

Bryan