News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Quicktime runout/check my math?

Started by JerseyJoe, May 01, 2012, 09:10:21 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

JerseyJoe

May 01, 2012, 09:10:21 PM
I got my new Quicktime bell today, pleasantly surprised they incorporate the starter cover now.
I have a good, strong, magnet base on my dial and got consistent readings on several go-rounds.
I'm thinking I need the .007-.014 offset dowels? (Please see pic, all readings are +)

Rolling_Thunder

#1
May 02, 2012, 12:06:21 AM
no pic ?
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

JerseyJoe

#2
May 02, 2012, 06:53:46 AM
Really? I'm looking right at it.

Chryco Psycho

#3
May 02, 2012, 07:46:21 AM
7 * should get you close , 1/2 of 16 thou to get to zero

JerseyJoe

#4
May 02, 2012, 08:27:33 AM
It's my poor writing, I think you're seeing the bottom reading as "16". The bottom reading is .026.
So half of that (13*) is what I'll try to move, right? I'm going to order a set of Robb MC's as soon as I'm sure.
Thanks, Chryco  :cheers:

Chryco Psycho

#5
May 02, 2012, 10:56:07 AM
Yeah you need to adjust approx 1/2 the distance , I think Moroso or Lakewood has the pins for less $$ than Mopar , try Jegs .
Start with .014 offset , you should get into spec with that

JerseyJoe

#6
May 02, 2012, 12:30:06 PM
Quote from: Chryco Psycho on May 02, 2012, 10:56:07 AM
Start with .014 offset , you should get into spec with that

Just ordered the dowels, thanks again.
You can't tell in the pic, but QT is also making the bell with a Z-bar bracket welded on. None of the pics I saw while shopping showed this. I guess they're trying to keep updating.
        Joe
Print
Go Up Pages1
User actions