News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Fuel Vapor separator

Started by 66FBCharger, April 25, 2012, 06:52:13 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

66FBCharger

April 25, 2012, 06:52:13 AM
Who makes a correct fuel vapor separator?
I have a new reproduction separator I bought years ago from Year One. There is no restriction in the 1/4" return nipple. The FSM calls for a .060" orefice. Does anyone sell a separator for a '69 440 that has the correct orefice?
'69 Charger R/T 440 4 speed T5, '70 Road Runner 440+6 4 speed, '73 'Cuda 340 4 speed, '66 Charger 383 Auto
SOLD!:'69 Charger R/T S.E. 440 4 speed 3.54 Dana rolling body

bill440rt

#1
April 25, 2012, 07:07:45 AM
I got mine from Jack's Auto Parts. And then there's Herb's, Mega Parts, A&M, Dale's Cuda Shop, Frank Badalson...
I can't imagine there is more than one source making these.
"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce

charger Downunder

#2
April 25, 2012, 07:39:36 AM
If i remember right one of the repos had a fuel line connection  that was to small in diameter.
[/quote]

Just 6T9 CHGR

#3
April 25, 2012, 04:13:23 PM
Member Bill Allphin @ A & M High Tech Auto sells the correct ones

www.amhightechauto.com
Chris' '69 Charger R/T

charger Downunder

#4
May 05, 2012, 09:03:51 AM
Here this link has details about the problems with them.
http://a12mopar.com/yabb/YaBB.pl?num=1324606912;start=all
[/quote]
Print
Go Up Pages1
User actions