News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

ALVIN Lab-metal

Started by Crazy440, April 27, 2012, 05:30:27 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Crazy440

April 27, 2012, 05:30:27 PM
Has anyone used this product? Trying to find out what it will not adhere to. Need to run a straight edge barrier along one side of the area that I'm smoothing and don't want it running down the side. I'm thinking perhaps Plexiglas or Teflon.
Any thoughts?

Thanks
I used to have a handle on life....but it broke off.

vancamp

#1
May 06, 2012, 08:00:28 AM
I have used it and will not be again, I dont know if it was old or what but it did not work as advertised it hardened and turned into chalky and powdery substance that would not hold together.
Print
Go Up Pages1
User actions