News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Help i need a wheel.

Started by Evolution69, April 20, 2012, 07:01:08 PM

Previous topic - Next topic

Evolution69

While my car was being shipped , It got loaded with a flat and from what we can guess was dragged at some point causing the wheel and tire to damage, Now I need to get a spare wheel/tire for cheap quickly.

Where would be the best place I can look? ebay?, I only need one to get her home, Also what pcd are the 68 RT's i tried to google it but got no definitive answers.

Thank you for your time
Matching numbers 1968 Dodge Charger RT

"Because bad guys always drove Chargers" - Richard Hammond


myk

That's terrible!  Try the local wrecking yards, that would be your quickest bet.  The bolt spacing size is 5x4.5" I think...

moparfan53

As mentioned above, the wheel bolt pattern is 5" x 4.5". This is common for many years Chrysler and Ford rear wheel drive cars. I have wheels off a 2005 Jeep Wrangler on my 69 Charger (for storage purposes).

I may be a little slow... what is "pcd"?  ;D :shruggy:

myk

I was wondering that also...

hatersaurusrex

Pitch Circle Diameter... and you've both already answered the question :)
[ŌŌ]ƖƖƖƖƖƖƖƖƖƖƖƖƖƖƖƖƖƖƖƖƖƖƖƖƖƖƖ[ŌŌ] = 68
[ŌŌ][ƖƖƖƖƖƖƖƖƖƖƖ][ƖƖƖƖƖƖƖƖƖƖƖ][ŌŌ] = 69
(ŌŌ)[ƗƗƗƗƗƗƗƗƗƗƗƗƗƗƗƗƗƗ](ŌŌ) = 70

Evolution69

Thank you very much gents you have been very helpful.
Matching numbers 1968 Dodge Charger RT

"Because bad guys always drove Chargers" - Richard Hammond