DIRTY WHITE BOY'S 68 BUILD UPDATED 3-22-14

[cdr]

this is the 900 CFM EFI THAT MY BUDDY gave to me, it needs to be sent to holley for a wide band o2 upgrade ,its not as easy to tune as some of the newer set ups ,but its brand spankin new & free  it will go on an indy single plane intake max wedge port,thanx DR FIX

[cdr]

my 3 in stainless x pipe system magna flow

[cdr]

these are what we run on DR FIX'S 10.9 TRANS AM STRAIGHT through,not all that loud 

[cdr]

some hemi springs i got from tony alley,he has a 69 hemi rr that he mini tubed & sold me the springs cheap

[cdr]

junk tunnel ram just havin fun

[cdr]

now for some garage shots,moral of the story is when doing a restoration you will need about 4 times more room than you think

[cdr]

m

[cdr]

this is my jwbellhousing to convert my a518 overdrive for a big block

[cdr]

this is my a518 overdrive

[cdr]

my 3200 stall lock up converter

[cdr]

alum rod for my 511 build

[cdr]

southern & proud
to be an american 

[JB400]

Best thing is, when you get the car together, you get a clean garage as well.

[NHCharger]

now for some garage shots,moral of the story is when doing a restoration you will need about 4 times more room than you think

Man, ain't that the truth. Looks like your making some progress.

[cdr]

got my flow bench home & now its cooler out side,im tryin to get a little work done on my heads

these are the 440 super stealth & this is for a street motor,my testing cyl adapter is 4.250 bore diameter, i will machine it to 4.4 when i can get to it.

otb .200 140              short side work,& raise port window to max wedge      .200 160
    .300 202              2.14 valve,30 deg back cut,NO SEAT work done yet    .300 220
    .400 242                                                                                       .400 260
    .500 256                                                                                       .500 287
    .600 267                                                                                       .600 307
    .700 267                                                                                       .700 323
                                                                                                       .800 334          to be continued

[cdr]

well got some needed parts for the charger for christmas,thanx to some awesome people,so i'm going to finish my metal work,fitting the outer wheel house & then i can hopefully finish the quarter panel 

[cdr]

scraped off the under coating & sprayed edges with weld through primer & red oxide for the rest,got the outer wheel house fitted ,will weld in tomorrow

[cdr]

[cdr]

[cdr]

[cdr]

[cdr]

got the outer wheel house welded.now some grinding & seam sealer  then to the trunk drop off

[Cooter]

VERY Nice cdr. I see your on the ground, in a small shop. My hats off to ya. Excellent work.

[cdr]

VERY Nice cdr. I see your on the ground, in a small shop. My hats off to ya. Excellent work.

thanx cooter ,yep it is small,what sucks is when i got sick & shut down my shop, my lift is still there & no room here at the house for it.

[cdr]

cleaned off & primed the inner rocker
welded up some holes
& fitting this huge, gigantic ,gargantious quarter panel