Vibration Insulators - Where to buy ?

[440]

Where can I find these ? They are for the blower motor.

[440]

Anyone ?

[gtx6970]

When / if you find them. Let me know I have been looking for well over a year with no luck

[440]

Hmmm, that's not what I wanted to hear. It looks like you might be able to get similar ones in metric, or get them made to your specifications if you order a minimum quantity.

I guess I'll just have to clean these up and re-use them.

[Dino]

Is it that whole thing you need or just the bolts with the rubber tops?  I've seen similar ones at hardware stores.

[440]

Just the rubber pieces. I'm conviced they are out there but hard to find.

[Dino]

Hmmm I'm sure I've seen something like that before as well.  You could easily make those though, just get some solid rubber, bolts and washers and go to town!

[matrout76]

http://www.mcmaster.com/#vibration-damping-sandwich-mounts/=gxipg0

you'll need some info, but this should be a start.

[440]

Does anyone have an original one they could measure up. I have two heater boxes and both had insulators with 1/4-20 thread, however the nuts I ordered for an AC motor are quite a bit larger.

[gtx6970]

The a/c box blower motor has 3 threaded studs 1/4-20 .

the box to firewall mounting is 5/16-18 threads

[440]

They sent me the wrong ones then, they are labeled as blower motor nuts but are 5/16.   Frustrating 

[440]

McMaster-Carr part# 9376K3G