Brake conversion...manual to power...part numbers...

[1968 Charger B5]

Switching my 68 charger non power drum brakes to power front disc brakes...    Am I correct in the following? I know this has been answered before in different threads, but I do not feel like sifting through everything please....and thanks everyone

I so far ordered the following....is it all correct?

69 power brake booster
69 power brake master cylinder (lines come out engine side...)

73-76 abody spindles....have bearings/etc...

73 charger 11" rotors, calibers, pads, and brake lines...



On its way....did all from autozone, came out really cheap...is there anything I should have done differently? I was told this setup works...

[stripedelete]

Did Auto Zone have the spindles?

[1968 Charger B5]

No.  The spindles only I had in my garage....saved up few sets over the years...

[Just 6T9 CHGR]

How about the booster?  Did you get it yet?  Curious to see what you come up with

[matrout76]

can you please post up your Autozone part numbers?

Thanks!
Matt

[1968 Charger B5]

...

[gtx6970]

Make sure you change the dist valves from drum to disc types

1969 Disc shown

[1968 Charger B5]

Ok great thank you. One question, where is the best place to get the dist. valve, and the prebent/made lines...

[1968 Charger B5]

bump...

[stripedelete]

Lines and valves in the picture above came from Fine Lines in Wadsworth Ohio.

[1968 Charger B5]

who wants part numbers...? lol

[b5blue]

Have you got the peddle linkage for the inside of the car and backing plate for booster?   

[1968 Charger B5]

i guess...? it all bolted right on...